Skip to content

Newpowa 100 W bifacial panel review

A 100 W panel that generates from both sides, with published Vmp and Imp, 2,400 Pa wind and 5,400 Pa snow loads, at 12.74 lb and $69.99.

Power from both sides

Newpowa’s refreshed 100 W panel is bifacial: its rear side captures light reflected from the ground. Newpowa says higher reflectivity means more output and recommends mounting it 28 to 50 inches above the ground for the best rear-side gain. It does not publish a percentage for that gain.

Electrical data

The listing gives Pmax 100 W, Vmp 17.1 V and Imp 5.85 A. Those are the figures a charge controller has to handle, and they are what MPPT controllers track. The spec table’s “maximum voltage 12 volts” contradicts the Vmp and should be ignored.

Built for weather

2,400 Pa of wind and 5,400 Pa of snow load, the same as HQST. Bypass diodes are pre-installed and 3 ft cables come attached. It measures 36.61 × 22.83 × 1.18 in and weighs 12.74 lb.

Warranty

Two years of material and workmanship, over 90% output at 10 years and over 80% at 25 years.

Price on Amazon.com

Newpowa America listed it at $69.99 on November 2, 2026, about $0.70 per watt.

Prices quoted in this text were read on November 2, 2026. The live price is at the top of the page.

What it gets right, and what it leaves out

Strengths

  • The only bifacial panel here: extra output from reflected light
  • Published Vmp and Imp, the operating point a controller has to match
  • The lightest rigid 100 W panel here, 12.74 lb

Compromises

  • The rear-side gain needs a raised mount, 28 to 50 in above a reflective surface
  • A two-year workmanship warranty, shorter than Renogy’s and HQST’s five
  • The spec table lists 12 V as maximum voltage, which conflicts with its own 17.1 V Vmp

Specifications

Rated power100 W (Pmax)
Operating pointVmp 17.1 V, Imp 5.85 A
BifacialRear side captures reflected light; best gains when mounted 28–50 in (0.7–1.3 m) above ground
Loads2,400 Pa wind, 5,400 Pa snow
WiringBypass diodes pre-installed, 3 ft solar cables attached
Size36.61 × 22.83 × 1.18 in
Weight12.74 lb
Output warrantyOver 90% at 10 years, over 80% at 25 years
Workmanship warranty2 years
Amazon referenceB09D74LL9T

Questions owners ask about this one

What does bifacial mean here?

The rear side also produces power from light reflected off the ground. Newpowa recommends mounting it 28 to 50 inches above ground for the best rear-side gain. Flush on a roof, the rear sees little light.

What are Vmp and Imp?

The voltage and current at maximum power: 17.1 V and 5.85 A. An MPPT controller tracks that point; a PWM controller pulls the panel down to battery voltage.

Are the diodes included?

Yes. Bypass diodes are pre-installed in the junction box, with a pair of 3 ft solar cables attached.

Our score

8.1/ 10

A bifacial 100 W panel with real electrical data and load ratings. It pays off on a raised mount over a bright surface; flat on a roof it is an ordinary 100 W panel.

Set beside the neighboring portable power units

Same category, nearby prices, between portable power units. What remains is the specifications every one publishes — half empty, a column is no use.

Model Price Rated powerSize
Newpowa 100 W bifacial panel $70 100 W (Pmax)36.61 × 22.83 × 1.18 in
JJN 100 W 10BB panel $60 100 W, 12 V38.2 × 22.7 × 1.2 in
HQST 100 W 12 V panel $50 100 W, 12 V31.8 × 27.5 × 1.18 in (square format)
Renogy 100 W N-type panel $90 100 W34.1 × 22.8 × 1.2 in

Where the models are not equal, in portable power units

  • If price decides: HQST 100 W 12 V panel, at $50.
  • Highest Size in the table: JJN 100 W 10BB panel (38.2 × 22.7 × 1.2 in).

Who this one is for, among portable power units

Ground mounts and raised racks over light-colored surfaces

Sources

Specifications: the manufacturer sheet for portable power gear and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.

How these portable power units are assessed here