Skip to content

KF CPTEC Nine-piece ratcheting set, 0.5 to 35 mm (0.02 to 1.38 in)², with stripper

A ratcheting crimping tool with seven interchangeable jaw sets covering 0.5 to 35 mm (0.02 to 1.38 in)² and a wire stripper, for insulated and uninsulated lugs, ferrules and solar connectors.

KF CPTEC nine-piece ratcheting crimping set with jaws and stripper

KF CPTEC Nine-piece ratcheting set, 0.5 to 35 mm (0.02 to 1.38 in)², with stripper

A ratcheting crimping tool with seven interchangeable jaw sets covering 0.5 to 35 mm (0.02 to 1.38 in)² and a wire stripper, for insulated and uninsulated lugs, ferrules and solar connectors.

Die sizes
0.5 to 35 mm (0.02 to 1.38 in)², given also as AWG 22 to 2, across seven jaw sets, third bullet
Ratchet
A ratcheting crimping tool, first bullet — one of only two here
Adjustment
Seven interchangeable jaw sets, first bullet
Included wrenches
None
Strippers
A wire stripper is included, first bullet — the only tool here to supply one
Materials
Described as a robust ratcheting tool; the steel is not specified
Kit contents
Ratcheting crimping tool, stripping tool and seven interchangeable jaw sets, first bullet
Amazon reference
B09M8G3BF1
EAN
0786833980411
  • A ratchet, so the crimp completes before the tool releases — the single most important feature on a crimper
  • A stripper included, so the cable can be prepared with the same purchase
  • The jaw steel is not specified

Best for: A full installation — battery cable, ferrules and solar contacts — done properly with one set.

≈ $49
Check price on Amazon

Specifications

Die sizes
0.5 to 35 mm (0.02 to 1.38 in)², given also as AWG 22 to 2, across seven jaw sets, third bullet
Ratchet
A ratcheting crimping tool, first bullet — one of only two here
Adjustment
Seven interchangeable jaw sets, first bullet
Included wrenches
None
Strippers
A wire stripper is included, first bullet — the only tool here to supply one
Materials
Described as a robust ratcheting tool; the steel is not specified
Kit contents
Ratcheting crimping tool, stripping tool and seven interchangeable jaw sets, first bullet
Amazon reference
B09M8G3BF1
EAN
0786833980411

The one tool in this family that will do the whole job.

The ratchet

It does not release until the crimp is complete. That removes the variable that ruins crimps — how hard the installer squeezed — and it is the difference between a repeatable joint and a hopeful one. Two of the four tools here have it.

The range

0.5 to 35 mm (0.02 to 1.38 in)², AWG 22 to 2. Ferrules on control wiring at one end, 35 mm (1.38 in)² battery lugs at the other. The battery cable reviewed elsewhere in this catalog is 35 mm (1.38 in)², and this tool reaches it.

The stripper

Included. The only tool in this family to supply one, and the cable has to be stripped before any of the jaws are relevant.

The crimp profile, left undescribed

The jaw steel. Any crimping standard or pressure. And no assembly wrenches, so solar housings still need the two-wrench tightening that the connector sets supply.

Availability

American Amazon store was asking around $49 while this page was being put together.

These figures are what Keepa held on the day this page was last rebuilt. Stock and prices move without notice.

Prices quoted in this text were read on September 16, 2026. The live price is at the top of the page.

Questions this guide gets asked

Why does a ratchet matter so much?

It will not release until the crimp is fully formed, so the pressure does not depend on hand strength or on whether the installer was paying attention. An under-pressed crimp is indistinguishable from a good one by eye and heats under load. This is the feature that separates a tool from a pair of pliers.

Does 35 mm (1.38 in)² cover battery cable?

It covers the 35 mm (1.38 in)² lugs used on many leisure batteries and inverters, which is the size published on the battery cable elsewhere in this catalog. Larger banks use 50 mm (1.97 in)² and above, which needs a hydraulic or hex crimper.

Who this one is for, among MC4 crimping tools

A full installation — battery cable, ferrules and solar contacts — done properly with one set.

The price on Amazon.com

This model is listed on Amazon.com, at ≈ $49 at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.

Details checked on September 16, 2026.

What buyers actually choose

Amazon reports what buyers took in the month before this page was last checked: at least 50.

The figure is a floor, rounded by Amazon, and read through Keepa — it says what buyers picked, not what a maker claims.

Sources

Specifications: the manufacturer sheet for portable power gear and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.

How these MC4 crimping tools are assessed here

All MC4 crimping tools