DFRobot’s DFR0559 uses the CN3165 MPPT chip to charge a single 3.7 V Li-ion or LiPo cell from a 5 V panel of up to 10 W, at up to 900 mA. A built-in DC-DC converter supplies a regulated 5 V at 1 A, with an on/off switch, so an Arduino, an ESP32 or a LoRa board runs directly from it.
Built for unattended devices
Standby current is under 1 mA, which matters for a remote sensor node or a weather station that has to survive cloudy weeks. Protections cover overcharge and related faults, and a Micro-USB port allows charging indoors while testing.
Small
At 33 × 63 mm, it fits in a waterproof box or a 3D-printed case.
Price on Amazon.com
DFRobot listed it at $13.90 on November 2, 2026.
Prices quoted in this text were read on November 2, 2026. The live price is at the top of the page.
What it gets right, and what it leaves out
Strengths
The only controller here made for electronics projects: Arduino, ESP32, LoRa, sensors
Under 1 mA standby, for unattended sensor nodes
A regulated 5 V output, so no extra converter
Compromises
10 W of panel at most
Single-cell lithium only, not 12 V batteries
A bare circuit board that needs its own enclosure
Specifications
Panel
5 V solar panels up to 10 W
Chip
CN3165 MPPT
Charge current
Up to 900 mA
Battery
3.7 V Li-ion or LiPo
Output
Regulated 5 V, 1 A, with on/off switch
Other input
Micro-USB charging
Standby current
Under 1 mA
Size
33 × 63 mm
Amazon reference
B07MML4YJV
EAN
6959420913473
Questions owners ask about this one
Can it charge a 12 V battery?
No. It charges 3.7 V Li-ion or LiPo cells from 5 V panels up to 10 W.
What can it power?
A regulated 5 V, 1 A output runs an Arduino, an ESP32, a LoRa board or sensors.
Can I test it indoors?
Yes, through the onboard Micro-USB port.
Our score
8.0/ 10
A small, well-specified module for solar-powered electronics. It belongs on this shelf as the smallest MPPT, not as an RV controller.
Set beside the neighboring portable power units
Same category, nearby prices, between portable power units. What remains is the specifications every one publishes — half empty, a column is no use.
Where the models are not equal, in portable power units
If price decides: this model, at $14.
Who this one is for, among portable power units
Solar-powered IoT nodes, weather stations and maker projects
What buyers actually choose
Amazon reports what buyers took in the month before this page was last checked: at least 100.
The figure is a floor, rounded by Amazon, and read through Keepa — it says what buyers picked, not what a maker claims.
Sources
Specifications: the manufacturer sheet for portable power gear and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
EPEVER Tracer4210AN G3 40 A MPPT controller: 12/24 V auto, 100 V PV, 520 W at 12 V or 1,040 W at 24 V, common negative ground, LiFePO4 and NCM profiles, temperature compensation, RS485 Modbus, over 99.5% tracking
EPEVER’s 40 A Tracer G3 states its panel limits outright, 520 W at 12 V and 1,040 W at 24 V, with common negative ground and RS485, for $118.99.
Best for: Solar builders who want a configurable controller with an open Modbus interface
Renogy Rover 40 A MPPT controller, 12/24 V auto, 100 V PV, 98% conversion and 99% tracking efficiency, -40 to 149 °F with low-temperature protection, 4-stage lead-acid and 2-stage lithium charging, RS485, 3-year warranty
Renogy’s Rover 40 A MPPT for 12 and 24 V banks, rated from -40 to 149 °F with low-temperature charge protection, sold by Amazon at $168.99.
Best for: RV and cabin systems in cold climates, on 12 or 24 V lithium banks
Power Queen 30 A MPPT controller, 12/24 V, built-in Bluetooth, 99% tracking and 98% peak conversion, LCD with four buttons, die-cast aluminum body, default LiFePO4 mode, 2 kg
A 30 A MPPT controller with Bluetooth built in and a die-cast aluminum body, set for LiFePO4 by default, for $122.99. PV voltage not in the bullets.
Best for: LiFePO4 owners who want app monitoring without extra modules