Skip to content

Power Queen 30 A MPPT controller with Bluetooth review

A 30 A MPPT controller with Bluetooth built in and a die-cast aluminum body, set for LiFePO4 by default, for $122.99. PV voltage not in the bullets.

Bluetooth included

Power Queen builds Bluetooth into this 30 A MPPT controller, so the app works without buying a module. Renogy’s Rover and EPEVER’s Tracer both need one. An LCD with four buttons and LED lights cover the controller itself.

Ready for lithium

It defaults to a LiFePO4 charging mode, which suits Power Queen’s own batteries. Sealed and gel lead-acid work after adjusting the parameters.

A missing figure

The bullets give 99% tracking and 98% peak conversion efficiency but no maximum PV voltage. That is the number that decides how many panels can go in series.

Price on Amazon.com

Power Queen-US listed it at $122.99 on November 2, 2026.

Prices quoted in this text were read on November 2, 2026. The live price is at the top of the page.

What it gets right, and what it leaves out

Strengths

  • Bluetooth built in, where Renogy and EPEVER need a module
  • A LiFePO4 profile out of the box
  • A die-cast aluminum body for heat dissipation

Compromises

  • Maximum PV voltage is not given in the bullets
  • Lead-acid needs manual parameter setting
  • At 2 kg, heavy for 30 A

Specifications

Charge current30 A
Battery voltage12/24 V
Efficiency99% tracking, 98% peak conversion
ConnectivityBuilt-in Bluetooth, no extra module
DisplayLCD with four buttons, LED status lights
BodyDie-cast aluminum
ProtectionReverse polarity, overpower, overvoltage, short circuit, over-temperature
BatteriesLiFePO4 by default; sealed and gel lead-acid by adjusting parameters
Weight2 kg
Amazon referenceB0BD6ZSJQY
EAN0723884710345

Questions owners ask about this one

What is the maximum PV voltage?

The bullets do not say. Check the manual or the label before putting panels in series.

Does it need a Bluetooth module?

No. Bluetooth is built in.

Can it charge AGM?

Yes, sealed and gel lead-acid by adjusting parameters; LiFePO4 is the default mode.

Our score

7.8/ 10

A Bluetooth MPPT that ships ready for lithium. Find its PV voltage limit in the manual before wiring panels in series.

Set beside the neighboring portable power units

Same category, nearby prices, between portable power units. What remains is the specifications every one publishes — half empty, a column is no use.

Model Price Charge currentBattery voltageBatteries
Power Queen 30 A MPPT controller with Bluetooth $123 30 A12/24 VLiFePO4 by default; sealed and gel lead-acid by adjusting parameters
EPEVER Tracer 4210AN G3 40 A $119 40 A12/24 V autoGel, AGM, flooded, sealed; LiFePO4 (4s/12 V, 8s/24 V); Li-NCM (3s/12 V, 6s or 7s/24 V); user-defined
Renogy Rover 40 A $169 40 A12/24 V auto-detectGel, AGM, flooded, lithium
iSunergy 20 A portable MPPT controller $48 20 A12 or 24 VAGM, gel, LiFePO4

Where the models are not equal, in portable power units

  • If price decides: iSunergy 20 A portable MPPT controller, at $48.
  • Highest Charge current in the table: Renogy Rover 40 A (40 A).

Who this one is for, among portable power units

LiFePO4 owners who want app monitoring without extra modules

Sources

Specifications: the manufacturer sheet for portable power gear and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.

How these portable power units are assessed here