Skip to content

Both grades named, and the kit list complete

SOLAFIX Tiled roof, 2 modules 30–40 mm frame, EASY-CLICK clamps, 1.4301 hooks

A tiled roof kit for two modules with 30 to 40 mm frames, using 1.4301 stainless roof hooks and AL6005-T5 aluminium profiles with pre-assembled clamps.

SOLAFIX tiled roof mounting kit with stainless roof hooks and rails

SOLAFIX Tiled roof, 2 modules 30–40 mm frame, EASY-CLICK clamps, 1.4301 hooks

A tiled roof kit for two modules with 30 to 40 mm frames, using 1.4301 stainless roof hooks and AL6005-T5 aluminium profiles with pre-assembled clamps.

Supported panel sizes
Common solar modules with a frame height of 30 to 40 mm, third bullet
Weight
Nowhere in the listing
Tilt adjustment
None — a tiled roof mount follows the pitch of the roof
Material
Aluminium profiles in AL6005-T5, second bullet
Corrosion resistance
Corrosion-resistant roof hooks in 1.4301 stainless steel, second bullet — the grade is named
Fixing method
Six roof hooks with three wood screws each; pre-assembled components and EASY-CLICK clamps, first and fifth bullets
Any stated wind load
NOWHERE IN THE LISTING — tested and certified is claimed in the second bullet without naming a test or a body
Amazon reference
B0DH57LL1L (same reference on 5 Amazon marketplaces)
EAN
4270000212475
  • Both grades published: AL6005-T5 for the profiles and 1.4301 for the hooks
  • The frame height it fits is stated — 30 to 40 mm — which is the actual compatibility question
  • Tested and certified is claimed without naming the test or the certifying body

Best for: A tiled roof where the module frame height has already been measured.

≈ €80
Check price on Amazon

Specifications

Supported panel sizes
Common solar modules with a frame height of 30 to 40 mm, third bullet
Weight
Nowhere in the listing
Tilt adjustment
None — a tiled roof mount follows the pitch of the roof
Material
Aluminium profiles in AL6005-T5, second bullet
Corrosion resistance
Corrosion-resistant roof hooks in 1.4301 stainless steel, second bullet — the grade is named
Fixing method
Six roof hooks with three wood screws each; pre-assembled components and EASY-CLICK clamps, first and fifth bullets
Any stated wind load
NOWHERE IN THE LISTING — tested and certified is claimed in the second bullet without naming a test or a body
Amazon reference
B0DH57LL1L (same reference on 5 Amazon marketplaces)
EAN
4270000212475

A tiled roof kit that names both metals.

The two grades

AL6005-T5 for the aluminium profiles. 1.4301 for the roof hooks.

Both published. The hook grade is the one that matters most — it sits under a tile for the life of the installation, wet whenever the roof is, and 1.4301 is the standard grade that survives it.

The compatibility figure

Frame height 30 to 40 mm. That is the right number: the clamps grip the module frame edge, and a clamp sized for 30 mm does not hold a 45 mm frame. Panel length matters for the rails; frame height decides the clamps.

What arrives

Four aluminium rails. Six roof hooks with three wood screws each. Two middle clamps. Four end clamps. Two profile connectors. Four end caps. Instructions.

Counted, item by item. Nothing else to buy.

The EASY-CLICK clamps

Pre-assembled, described as removing the tool juggling. Convenient on a roof, where both hands are already busy — and pre-assembled also means not reconfigurable.

The claim to weigh

Tested and certified, in the second bullet, with no test named and no body named.

That is one step short of the Orno DIN rail energy meter in this catalogue, which cites a directive by number. Here it is an adjective — and no wind load appears anywhere, which is the test that would matter.

Availability

German Amazon store quoted about 80 € when this page was compiled.

British, French, Italian and Spanish Amazon catalogues carry an entry for it, with nobody selling.

American Amazon store returned nothing at all, so the buy button there runs a search instead of landing on an empty page.

These figures are what Keepa reported on the day this page was last updated. Availability and pricing move without notice.

Prices quoted in this text were read on 16 September 2026. The live price is at the top of the page.

More solar panel mounts

  • SolarFuture ballasted flat roof solar mount in anodised aluminium

    SolarFuture Flat roof, no drilling, ballasted, anodised aluminium, to 135 kg

    A ballasted flat roof mount for two solar panels in anodised aluminium, carrying up to 135 kg of ballast without drilling the roof membrane.

    Supported panel sizes
    Panels to 114 cm high, regardless of length; a complete set for two panels, fourth bullet
    Weight
    The ballast element carries up to 135 kg, second bullet — THE ONLY LOAD FIGURE PUBLISHED BY ANY MOUNT In this catalogue
    Tilt adjustment
    Tilt and width both adjustable to suit the module, third bullet
    Material
    Massive anodised aluminium, second bullet
    Corrosion resistance
    Anodised, stated in the second bullet
    Fixing method
    Ballasted — a weighting element spreads the load of paving bricks over a wide area, so the roof membrane is never drilled, first bullet
    Any stated wind load
    NOWHERE IN THE LISTING — storm security is claimed in the first bullet without a wind speed or a standard
    Amazon reference
    B0H1NWLC58 (same reference on 5 Amazon marketplaces)
    EAN
    4270004153194
    • A published load figure — 135 kg of ballast — which nothing else in this catalogue gives
    • No drilling, so a flat roof membrane stays intact
    • No wind load, which is precisely what ballast is calculated against

    Best for: A flat roof that must not be penetrated, where bricks can be carried up.

    ≈ €70
    Check price on Amazon
  • V-CANT-C solar panel mounting triangles in aluminium

    V-CANT-C Four triangles, 0°–90°, 2.5 mm material, panels to 114.5 cm, made in Germany

    A set of four mounting triangles in 2.5 mm material for panels to 114.5 cm, adjustable from 0 to 90 degrees by hole position, made in Germany.

    Supported panel sizes
    Panels to 114.5 cm, from the title
    Weight
    Nowhere in the listing
    Tilt adjustment
    0° to 90°, set by an arrangement of hole combinations, second bullet
    Material
    2.5 mm material thickness, first bullet — THE THICKEST PUBLISHED In this catalogue
    Corrosion resistance
    Nowhere in the listing
    Fixing method
    Four mounting triangles with two complete fixing sets, fifth bullet; for flat roofs, balcony installations and walls
    Any stated wind load
    NOWHERE IN THE LISTING — the listing states each fixing is individually inspected after production, without saying against what
    Amazon reference
    B0CGVSXPKT (same reference on 6 Amazon marketplaces)
    EAN
    4270003794718
    • 2.5 mm material, thicker than any other mount here that publishes a figure
    • Engineered and produced in Germany, with each unit inspected after production
    • No wind load, and the inspection is mentioned without saying what it checks

    Best for: A flat roof where the frame should be the strongest part of the installation.

    ≈ €60
    Check price on Amazon
  • avoltik tiled roof mounting set with stainless roof hooks and rails

    avoltik Tiled roof, 4 modules 30–45 mm, 16 triple-adjustable 1.4301 hooks, earthing clamps

    A tiled roof set for four modules with 30 to 45 mm frames, with sixteen triple-adjustable 1.4301 stainless roof hooks, eight rails and aluminium earthing clamps.

    Supported panel sizes
    Four modules with frame heights of 30 to 45 mm, second bullet
    Weight
    Nowhere in the listing
    Tilt adjustment
    None — a tiled roof mount follows the pitch of the roof; the roof hooks themselves are triple-adjustable, first bullet
    Material
    Eight 40 × 40 aluminium rails with six aluminium connectors and steel bolts, first bullet
    Corrosion resistance
    Stainless steel roof hooks in 1.4301, from the title; weather-resistant aluminium, third bullet
    Fixing method
    Sixteen triple-adjustable stainless roof hooks with an EASY-CLICK system on the middle and end clamps, first and second bullets
    Any stated wind load
    NOWHERE IN THE LISTING — no wind speed, wind zone or standard appears in the listing. ALUMINIUM EARTHING CLAMPS are included for bonding the array, fourth bullet
    Amazon reference
    B0D45T9KVT (same reference on 6 Amazon marketplaces)
    EAN
    4063811164503
    • Earthing clamps included, which no other mount in this catalogue supplies
    • Sixteen roof hooks, triple-adjustable, so an uneven tile course can still be followed
    • No wind load, on the largest and most expensive frame in this catalogue

    Best for: A four-module tiled roof array that has to be bonded as well as fixed.

    ≈ €190
    Check price on Amazon

Others on the same shelf

  • VoltBox portable Type 2 charger with a Schuko plug and control box

    VoltBox Schuko to Type 2, 3.7 kW, 7 m, 6/8/10/13/16 A, TPU, IP65

    A seven-metre Schuko to Type 2 portable charger with five current settings to 16 A, in TPU rated IP65 from −30 °C to 50 °C, with a delayed charging timer.

    Current rating
    Five settings — 6 A, 8 A, 10 A, 13 A, 16 A — for a maximum of 3.7 kW at 230 V, first bullet
    Coding
    IEC 62196-2, fifth bullet
    Phases
    Single phase, from the title
    Length
    7 metres, third bullet
    Cross-section
    Nowhere in the listing
    Flexibility
    TPU sheath, fourth bullet; no flexibility figure is given
    Weight
    Nowhere in the listing
    Storage
    Nowhere in the listing. IP65, weather-resistant from −30 °C to 50 °C, fourth bullet; delayed charging can be set from 1 to 12 hours, second bullet. NOTE: this product carries the manufacturer reference VPC-B5-16AC, the same reference as the WityCharge cable in this family, under a different EAN and ASIN
    Amazon reference
    B0FP4NFC9V (same reference on 5 Amazon marketplaces)
    EAN
    6979047250034
    • Five discrete current settings rather than a range, so the value is unambiguous
    • A 1 to 12 hour delay timer for off-peak charging, with no app required
    • The same manufacturer reference appears under a second brand in this family

    Best for: Off-peak charging from a household socket without installing anything.

    ≈ €108
    Check price on Amazon
  • WityCharge portable Type 2 charger with a Schuko plug

    WityCharge Schuko to Type 2, 3.7 kW, 7 m, single phase, 6–16 A, TPU, IP65

    A seven-metre single-phase Schuko to Type 2 portable charger with five current settings to 16 A, in TPU rated IP65, with a 1 to 12 hour delay function.

    Current rating
    Adjustable 6 A, 8 A, 10 A, 13 A, 16 A for a maximum of 3.7 kW at 230 V, first bullet
    Coding
    IEC 62196-2, fifth bullet
    Phases
    Single phase, stated explicitly in the title
    Length
    7 metres, third bullet
    Cross-section
    Nowhere in the listing
    Flexibility
    TPU sheath, fourth bullet
    Weight
    Nowhere in the listing
    Storage
    Nowhere in the listing. IP65 and weather-resistant, fourth bullet; a 1 to 12 hour charging delay, second bullet. NOTE: this product carries the manufacturer reference VPC-B5-16AC, the same reference as the VoltBox cable in this family, under a different EAN and ASIN
    Amazon reference
    B0H35NPHZY (same reference on 4 Amazon marketplaces)
    EAN
    6979047251147
    • The phase count is stated in the title, which four cables in this family omit
    • Five current settings and a 1 to 12 hour delay, both without an app
    • The same manufacturer reference appears under a second brand in this family

    Best for: The same job as its twin, at whichever of the two is cheaper on the day.

    ≈ €110
    Check price on Amazon
  • Retoo USB power meter with an LCD showing voltage and current

    Retoo USB tester, 4–20 V, 0–3 A, capacity to 99999 mAh

    A USB 2.0 power meter measuring 4 to 20 V and 0 to 3 A with a capacity counter to 99999 mAh, showing voltage, current, time and capacity on an LCD.

    Voltage and current range
    DC 4 V to 20 V and 0 A to 3 A, first bullet
    Resolution
    Nowhere in the listing
    Protocol identification
    Nowhere in the listing — it measures voltage and current without identifying a charging protocol
    Trigger function
    Nowhere in the listing
    Data pass-through
    USB 2.0, plugged between the port and the device with no driver or software, third bullet
    Display
    An LCD showing four values at once: voltage, current, elapsed measuring time and capacity, second bullet
    Logging
    A memory function for running or completed measurements, with a reset, fourth bullet
    Amazon reference
    B09QXLS5JP (same reference on 5 Amazon marketplaces)
    EAN
    5904094227396
    • Four values on screen at once, including elapsed time and accumulated capacity
    • No driver and no software — it works with anything that has a USB port
    • No resolution published, so the smallest readable current is unknown

    Best for: Checking what a power bank actually holds and what a charger actually delivers.

    ≈ €5
    Check price on Amazon

All solar panel mounts