A lead-acid charger never finishes a lithium battery · review
Victron Energy Blue Smart 12 V 15 A, IP65, seven-stage review
A 15 A IP65 charger with a seven-stage algorithm, integrated Bluetooth, and a forced charge function with a built-in desulfator for reviving deeply discharged batteries.
The bottom line The only mains charger here with a published enclosure rating and Bluetooth, with a seven-stage algorithm and a recovery function for flat batteries. Seven stages are named and not one voltage is given.
A 15 A charger that can be left in a wet locker and read from a phone.
IP65
Stated in the title. Across five mains chargers in this catalogue, one publishes an ingress rating. On a boat or in a van locker that is the specification that decides whether the charger survives its installation.
Seven stages, no voltages
Bulk through to float, described as optimal and gentle. The stages are named and the voltages are not — not absorption, not float, not the storage level. For a charger serving both lead-acid and lithium, those are two different sets of numbers and neither appears.
The recovery function
Forced charge with an integrated desulfator, for deeply discharged or apparently dead batteries. Desulfation is a lead-acid process; the listing places it alongside lithium support without explaining how the profiles differ.
The monitoring
Integrated Bluetooth with VictronConnect, so charge state can be read without opening anything. On a charger fitted permanently in an awkward place, that is what makes it usable.
Availability
German, Italian and Spanish Amazon stores quoted 116 € to 158 € when this page was compiled.
British Amazon store carries it too, priced in its own currency, which the euro range above deliberately omits.
American and French Amazon stores returned nothing at all, so the buy button there runs a search instead of landing on an empty page.
These figures are what Keepa reported on the day this page was last updated. Availability and pricing move without notice.
Prices quoted in this text were read on 16 September 2026. The live price is at the top of the page.
What it gets right, and what it leaves out
Strengths
IP65 on a mains charger, so it can live in a locker or a damp workshop
A seven-stage algorithm with bulk and float both named
Bluetooth for monitoring from VictronConnect without opening the locker
Compromises
Seven stages are named and not one voltage is published
The desulfator applies to lead-acid; how the lithium profile differs is not described
No low-temperature behaviour
Specifications
Charge current
15 A at 12 V, from the title
Absorption
Named as a stage within the seven-stage algorithm, fourth bullet; no voltage is published
Float voltages
Float is named as the final stage, fourth bullet; no voltage is published
Profiles
Lead-acid and lithium-ion at 12 V or 24 V, first bullet, with motorcycle batteries also named
Low-temperature behaviour
Nowhere in the listing
Connectors
CEE 7/17 mains plug, from the title; output connectors are not described
Protections
Absent as a list; IP65 is stated in the title, with a forced charge function and integrated desulfator named in the second bullet
Amazon reference
B01JRZTAUO (same reference on 4 Amazon marketplaces)
EAN
8719076018025
Questions owners ask about this one
What does a seven-stage algorithm add over three?
More intermediate steps — typically a test phase, a recovery phase and a storage phase around the usual bulk, absorption and float. Whether that matters depends on the battery; what would settle it are the voltages, and this listing publishes none.
Does the desulfator affect a lithium pack?
Desulfation addresses lead sulphate crystals and has no equivalent on LiFePO4. The listing names it alongside lithium support without saying how the two interact, which is a question for the manual before a lithium pack is connected.
5 A charge · absorption not published · float not published, a patented maintenance stage is named · LiFePO4 only, 5–60 Ah charging and up to 120 Ah maintenance · low-temperature behaviour not published · connectors not described · test sequence before charging
A 5 A charger dedicated to 12 V LiFePO4 batteries, charging packs from 5 to 60 Ah and maintaining up to 120 Ah, with a test sequence that assesses the battery before charging.
Best for: A motorcycle, a classic car or a small leisure pack that spends months unused.
10 A charge · 14.6 V constant voltage published · float not published · LiFePO4 only, 12 V/12.8 V · low-temperature behaviour not published · connectors not described · over-temperature, output over-voltage, over-current, reverse polarity, output short circuit, overload
A 14.6 V 10 A charger built only for 12 V LiFePO4 batteries, using a three-stage constant current, constant voltage and full charge sequence with a side cooling fan.
Best for: A 12 V LiFePO4 bank that wants a charger doing one thing correctly.
5, 10, 15 or 20 A selectable · absorption not published · float not published · LiFePO4, AGM, gel and lead-acid with automatic voltage detection · 0 V activation for LiFePO4, low-temperature lead charging named · connectors not described · reconditioning mode for lead
A 20 A charger for 12 V and 24 V systems with four selectable currents, automatic voltage detection, a 0 V activation function for lithium packs and a lead reconditioning mode.
Best for: A workshop dealing with both chemistries, and with lithium packs that have been left too long.