Skip to content

Midi, for the currents blade fuses cannot hold

JiuXinYuKeJi Four Midi holders with six Midi fuses, PA66, 52 × 28 × 25 mm

Four Midi fuse holders in PA66 with tinned screw terminals and an inspection window, supplied with six Midi fuses of 40 A, 50 A and 80 A.

JiuXinYuKeJi Midi fuse holders with Midi fuses and clamps

JiuXinYuKeJi Four Midi holders with six Midi fuses, PA66, 52 × 28 × 25 mm

Four Midi fuse holders in PA66 with tinned screw terminals and an inspection window, supplied with six Midi fuses of 40 A, 50 A and 80 A.

Fuse standard
Midi bolt-down fuses, from the title — a different family from blade fuses
Current
The supplied fuses run to 80 A; the holder’s own rating is not published
Voltage ratings including DC
Nowhere in the listing
Terminals
Metal screws for a stable electrical connection, with tinned parts, first and third bullets
Mounting
Four holders, each approximately 52 × 28 × 25 mm, fifth bullet
Ingress rating
A close-fitting cover for protection against external influences, third bullet; no IP figure
Supplied fuses
Six: two 40 A, two 50 A, two 80 A, with eight clamps, fifth bullet
Amazon reference
B0FCM6WS6S (same reference on 5 Amazon marketplaces)
EAN
0689908299282
  • Midi fuses, which cover currents above what a blade fuse holds
  • Two of each value, so a blown fuse has a replacement in the box
  • No holder rating and no voltage rating

Best for: A battery-to-inverter feed where forty to eighty amps has to be protected.

≈ €10
Check price on Amazon

Specifications

Fuse standard
Midi bolt-down fuses, from the title — a different family from blade fuses
Current
The supplied fuses run to 80 A; the holder’s own rating is not published
Voltage ratings including DC
Nowhere in the listing
Terminals
Metal screws for a stable electrical connection, with tinned parts, first and third bullets
Mounting
Four holders, each approximately 52 × 28 × 25 mm, fifth bullet
Ingress rating
A close-fitting cover for protection against external influences, third bullet; no IP figure
Supplied fuses
Six: two 40 A, two 50 A, two 80 A, with eight clamps, fifth bullet
Amazon reference
B0FCM6WS6S (same reference on 5 Amazon marketplaces)
EAN
0689908299282

Midi fuses, for the currents that blade holders should not be asked to carry.

Why Midi

A blade fuse pushes into spring contacts. Above about forty amps that contact is where the heat goes, and a bolt-down Midi fuse clamps under two screws instead. This is the only holder in this family for that range.

What is supplied

Two 40 A, two 50 A, two 80 A, four holders and eight clamps. Two of each value is the useful part: a blown fuse has a replacement in the same box.

The material

PA66, named, with strength, insulation and heat resistance described, and tinned screw terminals. That is more material detail than five of the seven holders here offer.

The dimensions

Approximately 52 × 28 × 25 mm each.

The lines this listing leaves blank

What the holder itself is rated to carry, and at what voltage. The fuses go to 80 A; the holder’s own limit is unstated, and it is the holder that has to carry it continuously.

Availability

German and French Amazon stores quoted 10 € to 14 € when this page was compiled.

Italian and Spanish Amazon stores wanted more than 1.6× what the cheapest country wanted. A margin that wide usually means stock shipped in from elsewhere rather than a seller on the ground, so those quotes stay out of the range above.

American Amazon catalogue carries an entry for it, with nobody selling.

British Amazon store returned nothing at all, so the buy button there runs a search instead of landing on an empty page.

These figures are what Keepa reported on the day this page was last updated. Availability and pricing move without notice.

Prices quoted in this text were read on 16 September 2026. The live price is at the top of the page.

More fuse holders

  • Offgridtec inline blade fuse holder with a black rubber body

    Offgridtec Inline blade fuse holder, 30 A, 25 cm of 4 mm² lead

    A sealed inline blade fuse holder rated to 30 A, supplied pre-wired with 25 cm of 4 mm² cable in a rubber body with a waterproof lid.

    Fuse standard
    Standard ATC and blade fuses, third bullet
    Current
    Rated to 30 A, fifth bullet
    Voltage ratings including DC
    Nowhere in the listing — 12 V and 24 V systems are named as applications, which is not a rating
    Terminals
    Pre-wired with 25 cm of 4 mm² cable at both ends, fourth bullet — no crimping needed
    Mounting
    Inline, carried by the cable; no fixing described
    Ingress rating
    A fully sealed rubber body with a waterproof lid against water, dust and dirt, second bullet; no IP figure is given
    Supplied fuses
    None — the holder is supplied alone, one piece
    Amazon reference
    B077SGP5B3 (same reference on 5 Amazon marketplaces)
    EAN
    4250983245851
    • Pre-wired in 4 mm², which suits the 30 A rating rather than undercutting it
    • A sealed rubber body rather than a plastic clip-together cover
    • No voltage rating, on a component sold into 12 V and 24 V systems

    Best for: A single circuit tapped off a battery where the run is already cabled.

    ≈ €4
    Check price on Amazon
  • QitinDasen eight-way blade fuse box with a clear cover

    QitinDasen Eight-way blade fuse box, PBT body, with ten fuses

    An eight-way blade fuse box in flame-retardant PBT with tinned brass parts and a clear polycarbonate cover, supplied with ten standard blade fuses.

    Fuse standard
    Standard blade fuses, medium size, second bullet
    Current
    The supplied fuses start at 2 A and cover the commonest values; the box rating is not published
    Voltage ratings including DC
    Absent — 12 V/24 V appears in the title as an application
    Terminals
    Cable entry from the side, first bullet; the box fixes through two pre-formed holes
    Mounting
    Eight ways, secured through two pre-formed holes, first bullet
    Ingress rating
    A clear, robust, vibration-resistant polycarbonate cover protecting against dust and moisture, fourth bullet; no IP figure
    Supplied fuses
    Ten medium blade fuses in the commonest values including 2 A, 3 A, 5 A and 7.5 A, second bullet
    Amazon reference
    B07J5JRJT4 (same reference on 6 Amazon marketplaces)
    EAN
    0741025775213
    • Two plastics named and reasoned — PBT for the body, polycarbonate for the cover
    • Eight ways, the largest count in this family
    • No box rating and no voltage rating

    Best for: A van or boat panel where eight circuits leave one feed.

    ≈ £10 / €11
    Check price on Amazon
  • AWEHIRU four-way blade fuse block with a clear lid

    AWEHIRU Four-way ATO/ATC block with four fuses, 87 × 53 × 42 mm

    A four-way ATO/ATC blade fuse block with a sealed transparent lid, taking fuses to 30 A, supplied with one each of 10 A, 15 A, 20 A and 30 A.

    Fuse standard
    ATO and ATC blade fuses, from the title
    Current
    Up to 30 A per way, third bullet
    Voltage ratings including DC
    Absent — 12 V/24 V appears in the title as an application
    Terminals
    Screw terminals; the carrier is described as robust plastic, fourth bullet
    Mounting
    Four ways in a block measuring approximately 87 × 53 × 42 mm, fifth bullet
    Ingress rating
    Splash-protected by a transparent lid with a seal, second bullet; no IP figure
    Supplied fuses
    Four: one each of 10 A, 15 A, 20 A and 30 A, first bullet
    Amazon reference
    B01N3TGOB0 (same reference on 5 Amazon marketplaces)
    EAN
    0611029693106
    • The dimensions are published, which decides whether it fits the space
    • Four fuses supplied, one per way, in useful sizes
    • Splash-protected rather than sealed, with no IP figure

    Best for: A small distribution point where four circuits leave one battery feed.

    ≈ €9
    Check price on Amazon

Others on the same shelf

  • SEPO-LEITUNGEN ten-pair MC4 solar connector set

    SEPO-LEITUNGEN Ten pairs with two tools, IP67, for 4 and 6 mm²

    Ten pairs of solar connectors supplied with two assembly tools, rated IP67 and described as UV-resistant, for 4 and 6 mm² cable.

    Rated current
    Nowhere in the listing
    Voltage
    Nowhere in the listing
    Accepted cross-sections
    4 mm² and 6 mm², third bullet
    Ingress rating
    IP67, described as resistant to rain, dust and UV, second bullet
    Contact plating
    Nowhere in the listing
    Certifications
    Absent — described as compatible with common PV systems and as a replacement for common solar connectors
    Required tools
    Two assembly tools included; a crimping tool is not
    Amazon reference
    B0F3XHPFJD (same reference on 5 Amazon marketplaces)
    EAN
    4262413910543
    • Ten pairs, enough for a whole small array including spares
    • UV resistance named alongside the ingress rating, which matters on a roof
    • No current rating, no voltage rating and no contact material

    Best for: A full array where ten pairs and spares are needed in one purchase.

    ≈ €11
    Check price on Amazon
  • Weidmüller PV-Stick snap-in photovoltaic connectors

    Weidmüller PV-Stick snap-in, 1500 V, 30 A, IEC 62852, ten pieces

    Ten snap-in photovoltaic connectors conforming to IEC 62852 at 1500 V DC and 30 A, fitted without crimping, operating from −40 °C to 85 °C.

    Rated current
    30 A maximum, third bullet — the only current rating published by any connector here
    Voltage
    1500 V DC, first bullet
    Accepted cross-sections
    4 mm² to 6 mm², second bullet
    Ingress rating
    Nowhere in the listing
    Contact plating
    Nowhere in the listing
    Certifications
    Conforming to IEC 62852, first bullet — the standard that defines photovoltaic connectors
    Required tools
    None — SNAP-IN technology locks without crimping, second bullet
    Amazon reference
    B0BXVG32H7 (same reference on 6 Amazon marketplaces)
    EAN
    4262389435040
    • It cites IEC 62852, the standard that actually defines photovoltaic connectors
    • Current and voltage both published — 30 A and 1500 V DC
    • No ingress rating published, which both cheaper sets here give

    Best for: An installation where the connector rating has to be documented rather than assumed.

    ≈ £76 / €64
    Check price on Amazon
  • solartronics solar connector set with crimp contacts and spanners

    solartronics Six pairs, PPO, IP67, with crimp contacts and two spanners

    Six pairs of solar connectors with tinned copper crimp contacts and two assembly spanners, in flame-retardant PPO rated from −40 °C to +90 °C.

    Rated current
    Nowhere in the listing
    Voltage
    Nowhere in the listing
    Accepted cross-sections
    4 mm² and 6 mm², third bullet
    Ingress rating
    IP67, from the title
    Contact plating
    Tinned copper crimp sleeves, second bullet
    Certifications
    Absent — described as compatible with MC4 connectors, which is a product designation rather than a standard
    Required tools
    Two assembly spanners are included; a crimping tool is not
    Amazon reference
    B0DVZKD81W (same reference on 5 Amazon marketplaces)
    EAN
    4068508012266
    • Two assembly spanners in the box, which are needed to tighten the housings and are frequently a separate purchase
    • An operating range published at both ends — −40 °C to +90 °C
    • No current rating and no voltage rating at all

    Best for: A first solar run where the crimping tool is already owned.

    ≈ €7
    Check price on Amazon

All fuse holders