Skip to content

NuaSol Tiled roof, 2 modules, roof hooks under the tiles, 1230 mm profiles

A tiled roof mounting kit for two solar modules, fixing aluminium profiles under the tiles with roof hooks, with end and middle clamps and an expansion set.

NuaSol tiled roof solar mounting kit with roof hooks and rails

NuaSol Tiled roof, 2 modules, roof hooks under the tiles, 1230 mm profiles

A tiled roof mounting kit for two solar modules, fixing aluminium profiles under the tiles with roof hooks, with end and middle clamps and an expansion set.

Supported panel sizes
Two solar modules; no panel dimensions are published, first bullet
Weight
Nowhere in the listing
Tilt adjustment
None — a tiled roof mount follows the pitch of the roof
Material
Aluminium profile, second bullet
Corrosion resistance
Nowhere in the listing — no alloy, coating or stainless grade is named for the hooks
Fixing method
Roof hooks fitted directly under the tiles with supplied wood screws; modules held by end and middle clamps, second and third bullets
Any stated wind load
NOWHERE IN THE LISTING — no wind speed, wind zone or standard appears in the listing
Amazon reference
B0CBLYVL3L (same reference on 5 Amazon marketplaces)
EAN
4252023116251
  • Every component published with its dimensions — profile, connector, end clamp, end cap
  • An expansion set is offered, so a third module does not mean a second kit
  • No corrosion specification for the roof hooks, which is what rusts first

Best for: A tiled roof where the profiles have to be planned before the tiles come off.

≈ €80
Check price on Amazon

Specifications

Supported panel sizes
Two solar modules; no panel dimensions are published, first bullet
Weight
Nowhere in the listing
Tilt adjustment
None — a tiled roof mount follows the pitch of the roof
Material
Aluminium profile, second bullet
Corrosion resistance
Nowhere in the listing — no alloy, coating or stainless grade is named for the hooks
Fixing method
Roof hooks fitted directly under the tiles with supplied wood screws; modules held by end and middle clamps, second and third bullets
Any stated wind load
NOWHERE IN THE LISTING — no wind speed, wind zone or standard appears in the listing
Amazon reference
B0CBLYVL3L (same reference on 5 Amazon marketplaces)
EAN
4252023116251

A kit specified by its parts.

The dimensions

Profile: 1230 × 40 × 40 mm. Connector: 120 × 45.5 × 25 mm. End clamp: 70 × 34 × 28.6 mm. End cap: 43 × 20 × 43 mm.

Four components, four sets of measurements. On a tiled roof that is exactly what is needed before starting: the hooks have to land on rafters, and where they land depends on how long the profile is and where the connector sits.

The method

Roof hooks go under the tiles, fixed with the supplied wood screws directly to the structure. Aluminium profiles attach to the hooks. Modules clamp to the profiles with end and middle clamps.

Three steps, described in order.

No tilt

A tiled roof mount takes the pitch of the roof. That is not an omission, it is what the product is.

The expansion set

A third module can be added to the one-module profile rather than buying a second kit. Named in the fifth bullet, and it saves both money and roof space.

The lines this listing leaves blank

The hook material. A roof hook lives under a tile for the life of the installation, in whatever water gets past it, and the stainless grade decides whether it survives. Two kits in this family name 1.4301; this one names nothing.

No wind load. No weight.

Availability

German, French, Italian and Spanish Amazon stores quoted 80 € to 100 € when this page was compiled.

American Amazon catalogue carries an entry for it, with nobody selling.

British Amazon store returned nothing at all, so the buy button there runs a search instead of landing on an empty page.

These figures are what Keepa reported on the day this page was last updated. Availability and pricing move without notice.

Prices quoted in this text were read on 16 September 2026. The live price is at the top of the page.

All solar panel mounts