Skip to content

Keltorio Pair, 300 A, 12–48 V, M8, 163 mm fixing centres

A red and black 300 A busbar pair for 12 V to 48 V in rust-free brass with stainless clamps, a flame-retardant nylon base and a dust-proof cover.

Keltorio 300 A busbar pair in red and black with covers

Keltorio Pair, 300 A, 12–48 V, M8, 163 mm fixing centres

A red and black 300 A busbar pair for 12 V to 48 V in rust-free brass with stainless clamps, a flame-retardant nylon base and a dust-proof cover.

Current rating
300 A across 12 V to 48 V, from the title
Studs
M8, from the title
Material
Rust-free brass plates, stainless steel clamps and a flame-retardant nylon base, first bullet
Plating
Nowhere in the listing — the brass is described as rust-free rather than plated
Cover
A dust-proof plastic cover with insulated rubber nuts protecting the exposed terminals, first and third bullets
Mounting
5.5 mm fixing holes at 163 mm centres, fifth bullet — the only busbar here to publish them
Pole separation
Supplied as a pair, red and black, from the title
Amazon reference
B0GVSN1FH1 (same reference on 5 Amazon marketplaces)
EAN
0707191459050
  • The fixing holes and their spacing are published — 5.5 mm at 163 mm centres
  • Three materials named individually, each for its own part
  • No plating stated, which is what keeps a joint from oxidising

Best for: An installation where the busbar has to be drilled and bolted to a known panel.

≈ €37
Check price on Amazon

Specifications

Current rating
300 A across 12 V to 48 V, from the title
Studs
M8, from the title
Material
Rust-free brass plates, stainless steel clamps and a flame-retardant nylon base, first bullet
Plating
Nowhere in the listing — the brass is described as rust-free rather than plated
Cover
A dust-proof plastic cover with insulated rubber nuts protecting the exposed terminals, first and third bullets
Mounting
5.5 mm fixing holes at 163 mm centres, fifth bullet — the only busbar here to publish them
Pole separation
Supplied as a pair, red and black, from the title
Amazon reference
B0GVSN1FH1 (same reference on 5 Amazon marketplaces)
EAN
0707191459050

Three hundred amps with the drilling published.

The figure that makes it fittable

5.5 mm fixing holes at 163 mm centres. Three busbars in this catalogue; one tells you how to drill for it. A panel can be marked and prepared before the part is even in the room.

The materials

Rust-free brass plates. Stainless steel clamps. A flame-retardant nylon base. A dust-proof plastic cover. Four parts, four materials, each named for its own job.

The insulated nuts

Rubber-insulated nuts under the cover. The studs on a battery bus are permanently live, and a dropped spanner across two of them is the accident this prevents.

The rating

300 A across 12 V to 48 V, stated as one figure for the whole range. The Aigreat pair in this family ties its rating to 12 V specifically, which says more.

What is not stated

Any plating. The brass is described as rust-free, which is not the same as plated — plating is what keeps the contact face from oxidising where a lug presses on it.

Availability

German, French, Italian and Spanish Amazon stores quoted 37 € to 38 € when this page was compiled.

American Amazon catalogue carries an entry for it, with nobody selling.

British Amazon store returned nothing at all, so the buy button there runs a search instead of landing on an empty page.

These figures are what Keepa reported on the day this page was last updated. Availability and pricing move without notice.

Prices quoted in this text were read on 16 September 2026. The live price is at the top of the page.

All busbars