Skip to content

Three holders, one sentence of specification

HeyNana Three inline holders, 12 AWG lead, waterproof

Three waterproof inline blade fuse holders on 12 AWG lead, compatible with standard blade fuses.

HeyNana inline blade fuse holders, three in a pack

HeyNana Three inline holders, 12 AWG lead, waterproof

Three waterproof inline blade fuse holders on 12 AWG lead, compatible with standard blade fuses.

Fuse standard
Compatible with all standard blade fuses, second bullet
Current
Nowhere in the listing — the 12 AWG lead is stated in the title and no rating is given for the holder
Voltage ratings including DC
Absent — 12 volt appears in the title as an application, not as a rating
Terminals
12 AWG lead, from the title
Mounting
Inline, carried by the cable
Ingress rating
Described as waterproof, second bullet; no IP figure is given
Supplied fuses
None — three holders, from the title
Amazon reference
B08DXGQ55P (same reference on 5 Amazon marketplaces)
EAN
8429440718009
  • Three holders, which covers a small fit-out in one purchase
  • 12 AWG lead named, roughly equivalent to 4 mm²
  • Two bullets in total, one of which is the quantity

Best for: Three small accessory circuits in a van where the fuse sets the limit.

≈ €5
Check price on Amazon

Specifications

Fuse standard
Compatible with all standard blade fuses, second bullet
Current
Nowhere in the listing — the 12 AWG lead is stated in the title and no rating is given for the holder
Voltage ratings including DC
Absent — 12 volt appears in the title as an application, not as a rating
Terminals
12 AWG lead, from the title
Mounting
Inline, carried by the cable
Ingress rating
Described as waterproof, second bullet; no IP figure is given
Supplied fuses
None — three holders, from the title
Amazon reference
B08DXGQ55P (same reference on 5 Amazon marketplaces)
EAN
8429440718009

Three holders and two bullets.

What is stated

Three pieces. Compatible with all standard blade fuses. Waterproof.

What is not

The current rating. The voltage rating. Any IP figure. That is the whole gap, and the first of the three is the one that matters: a holder has a limit set by its contacts, and fitting a fuse above it moves the weak point from the fuse to the holder.

The lead

12 AWG, from the title. Roughly 4 mm², which in a European installation cabled in square millimetres is worth checking rather than assuming.

Where it sits

Three holders for less than the price of one elsewhere in this family. What is bought is the quantity; what is not bought is the specification.

Availability

German, French and Spanish Amazon stores quoted 5 € to 6 € when this page was compiled.

British Amazon store carries it too, priced in its own currency, which the euro range above deliberately omits.

Italian Amazon store wanted more than 1.6× what the cheapest country wanted. A margin that wide usually means stock shipped in from elsewhere rather than a seller on the ground, so that quote stays out of the range above.

American Amazon store returned nothing at all, so the buy button there runs a search instead of landing on an empty page.

These figures are what Keepa reported on the day this page was last updated. Availability and pricing move without notice.

Prices quoted in this text were read on 16 September 2026. The live price is at the top of the page.

More fuse holders

  • JiuXinYuKeJi Midi fuse holders with Midi fuses and clamps

    JiuXinYuKeJi Four Midi holders with six Midi fuses, PA66, 52 × 28 × 25 mm

    Four Midi fuse holders in PA66 with tinned screw terminals and an inspection window, supplied with six Midi fuses of 40 A, 50 A and 80 A.

    Fuse standard
    Midi bolt-down fuses, from the title — a different family from blade fuses
    Current
    The supplied fuses run to 80 A; the holder’s own rating is not published
    Voltage ratings including DC
    Nowhere in the listing
    Terminals
    Metal screws for a stable electrical connection, with tinned parts, first and third bullets
    Mounting
    Four holders, each approximately 52 × 28 × 25 mm, fifth bullet
    Ingress rating
    A close-fitting cover for protection against external influences, third bullet; no IP figure
    Supplied fuses
    Six: two 40 A, two 50 A, two 80 A, with eight clamps, fifth bullet
    Amazon reference
    B0FCM6WS6S (same reference on 5 Amazon marketplaces)
    EAN
    0689908299282
    • Midi fuses, which cover currents above what a blade fuse holds
    • Two of each value, so a blown fuse has a replacement in the box
    • No holder rating and no voltage rating

    Best for: A battery-to-inverter feed where forty to eighty amps has to be protected.

    ≈ €10
    Check price on Amazon
  • Offgridtec inline blade fuse holder with a black rubber body

    Offgridtec Inline blade fuse holder, 30 A, 25 cm of 4 mm² lead

    A sealed inline blade fuse holder rated to 30 A, supplied pre-wired with 25 cm of 4 mm² cable in a rubber body with a waterproof lid.

    Fuse standard
    Standard ATC and blade fuses, third bullet
    Current
    Rated to 30 A, fifth bullet
    Voltage ratings including DC
    Nowhere in the listing — 12 V and 24 V systems are named as applications, which is not a rating
    Terminals
    Pre-wired with 25 cm of 4 mm² cable at both ends, fourth bullet — no crimping needed
    Mounting
    Inline, carried by the cable; no fixing described
    Ingress rating
    A fully sealed rubber body with a waterproof lid against water, dust and dirt, second bullet; no IP figure is given
    Supplied fuses
    None — the holder is supplied alone, one piece
    Amazon reference
    B077SGP5B3 (same reference on 5 Amazon marketplaces)
    EAN
    4250983245851
    • Pre-wired in 4 mm², which suits the 30 A rating rather than undercutting it
    • A sealed rubber body rather than a plastic clip-together cover
    • No voltage rating, on a component sold into 12 V and 24 V systems

    Best for: A single circuit tapped off a battery where the run is already cabled.

    ≈ €4
    Check price on Amazon
  • QitinDasen eight-way blade fuse box with a clear cover

    QitinDasen Eight-way blade fuse box, PBT body, with ten fuses

    An eight-way blade fuse box in flame-retardant PBT with tinned brass parts and a clear polycarbonate cover, supplied with ten standard blade fuses.

    Fuse standard
    Standard blade fuses, medium size, second bullet
    Current
    The supplied fuses start at 2 A and cover the commonest values; the box rating is not published
    Voltage ratings including DC
    Absent — 12 V/24 V appears in the title as an application
    Terminals
    Cable entry from the side, first bullet; the box fixes through two pre-formed holes
    Mounting
    Eight ways, secured through two pre-formed holes, first bullet
    Ingress rating
    A clear, robust, vibration-resistant polycarbonate cover protecting against dust and moisture, fourth bullet; no IP figure
    Supplied fuses
    Ten medium blade fuses in the commonest values including 2 A, 3 A, 5 A and 7.5 A, second bullet
    Amazon reference
    B07J5JRJT4 (same reference on 6 Amazon marketplaces)
    EAN
    0741025775213
    • Two plastics named and reasoned — PBT for the body, polycarbonate for the cover
    • Eight ways, the largest count in this family
    • No box rating and no voltage rating

    Best for: A van or boat panel where eight circuits leave one feed.

    ≈ £10 / €11
    Check price on Amazon

Others on the same shelf

  • Wiltec generator fuel tap with a filter bowl

    Wiltec Fuel tap with filter, 6 mm hose, M10 × 1.25 male thread

    A fuel tap with an integrated filter for petrol generators, with a 6 mm fuel hose connection and an M10 × 1.25 male thread.

    Model compatibility
    Designed for petrol generators and stated to fit a wide range of models thanks to the M10 × 1.25 thread, third bullet; no model list is published
    Parallel kit ratings
    Not applicable — this is a fuel tap
    Cover material
    Not applicable
    Venting
    Not applicable
    Wheel kit load
    Not applicable
    Oil specification
    Not applicable
    Service parts
    A fuel tap with an integrated filter that keeps contamination out of the engine and can be replaced quickly, second and fifth bullets; 6 mm fuel hose connection, M10 × 1.25 male thread
    Amazon reference
    B00P1GAFZ8 (same reference on 5 Amazon marketplaces)
    EAN
    4250390825776
    • The thread and the hose bore are both published, which is the whole compatibility question
    • The filter is described as easily accessible and quickly replaceable
    • No list of generators it is known to fit

    Best for: A generator whose fuel tap has started weeping, measured first.

    ≈ €9
    Check price on Amazon
  • SEPO-LEITUNGEN ten-pair MC4 solar connector set

    SEPO-LEITUNGEN Ten pairs with two tools, IP67, for 4 and 6 mm²

    Ten pairs of solar connectors supplied with two assembly tools, rated IP67 and described as UV-resistant, for 4 and 6 mm² cable.

    Rated current
    Nowhere in the listing
    Voltage
    Nowhere in the listing
    Accepted cross-sections
    4 mm² and 6 mm², third bullet
    Ingress rating
    IP67, described as resistant to rain, dust and UV, second bullet
    Contact plating
    Nowhere in the listing
    Certifications
    Absent — described as compatible with common PV systems and as a replacement for common solar connectors
    Required tools
    Two assembly tools included; a crimping tool is not
    Amazon reference
    B0F3XHPFJD (same reference on 5 Amazon marketplaces)
    EAN
    4262413910543
    • Ten pairs, enough for a whole small array including spares
    • UV resistance named alongside the ingress rating, which matters on a roof
    • No current rating, no voltage rating and no contact material

    Best for: A full array where ten pairs and spares are needed in one purchase.

    ≈ €11
    Check price on Amazon
  • Weidmüller PV-Stick snap-in photovoltaic connectors

    Weidmüller PV-Stick snap-in, 1500 V, 30 A, IEC 62852, ten pieces

    Ten snap-in photovoltaic connectors conforming to IEC 62852 at 1500 V DC and 30 A, fitted without crimping, operating from −40 °C to 85 °C.

    Rated current
    30 A maximum, third bullet — the only current rating published by any connector here
    Voltage
    1500 V DC, first bullet
    Accepted cross-sections
    4 mm² to 6 mm², second bullet
    Ingress rating
    Nowhere in the listing
    Contact plating
    Nowhere in the listing
    Certifications
    Conforming to IEC 62852, first bullet — the standard that defines photovoltaic connectors
    Required tools
    None — SNAP-IN technology locks without crimping, second bullet
    Amazon reference
    B0BXVG32H7 (same reference on 6 Amazon marketplaces)
    EAN
    4262389435040
    • It cites IEC 62852, the standard that actually defines photovoltaic connectors
    • Current and voltage both published — 30 A and 1500 V DC
    • No ingress rating published, which both cheaper sets here give

    Best for: An installation where the connector rating has to be documented rather than assumed.

    ≈ £76 / €64
    Check price on Amazon

All fuse holders