Skip to content

A short grip span for small hands

Preciva Self-adjusting square crimper with 1200 ferrules, 0.25–10 mm²

A self-adjusting ferrule crimper producing an even four-sided crimp from 0.25 to 10 mm², with a short-span non-slip grip and 1200 ferrules.

Preciva self-adjusting ferrule crimper with ferrule assortment

Preciva Self-adjusting square crimper with 1200 ferrules, 0.25–10 mm²

A self-adjusting ferrule crimper producing an even four-sided crimp from 0.25 to 10 mm², with a short-span non-slip grip and 1200 ferrules.

Crimp profile
Even four-sided square press, first bullet
Cross-section range
0.25 to 10 mm², second bullet
Ratchet
Nowhere in the listing
Adjustment
Self-adjusting — the press sets itself to the ferrule, second bullet
Self-adjusting mechanisms
Automatic adjustment across the range, second bullet
Kit contents
1200 ferrules, from the title
Build quality
Non-slip coated grip with a short span requiring less hand opening, third bullet
Amazon reference
B073TZ5BBG (same reference on 6 Amazon marketplaces)
EAN
0602191688663
  • The short grip span is named specifically, which matters for smaller hands and confined spaces
  • An even four-sided press, described with the reason it holds better
  • No ratchet stated

Best for: Working inside a consumer unit or a cramped locker where the tool cannot open fully.

≈ $24 / £23 / €18
Check price on Amazon

Specifications

Crimp profile
Even four-sided square press, first bullet
Cross-section range
0.25 to 10 mm², second bullet
Ratchet
Nowhere in the listing
Adjustment
Self-adjusting — the press sets itself to the ferrule, second bullet
Self-adjusting mechanisms
Automatic adjustment across the range, second bullet
Kit contents
1200 ferrules, from the title
Build quality
Non-slip coated grip with a short span requiring less hand opening, third bullet
Amazon reference
B073TZ5BBG (same reference on 6 Amazon marketplaces)
EAN
0602191688663

A crimper for working where there is no room.

The grip span

Named in the third bullet: a short span requiring less hand opening. Seven tools in this family and one addresses the situation where crimping actually happens — inside an enclosure, at arm’s length, with a lid in the way.

The press

Even four-sided, with the reason given: pressure from four sides holds the ferrule better than two. Five of the seven tools here use this profile.

The self-adjustment

The press sets itself to the ferrule across 0.25 to 10 mm².

What is not stated

A ratchet. Three tools in this family have one, and it is the feature that makes a crimp repeatable rather than hopeful.

The jaw steel. And any crimping force, which none of the seven publishes.

Availability

German, French, Italian and Spanish Amazon stores quoted 18 € to 26 € when this page was compiled.

American and British Amazon stores carry it too, priced in their own currency, which the euro range above deliberately omits.

These figures are what Keepa reported on the day this page was last updated. Availability and pricing move without notice.

Prices quoted in this text were read on 16 September 2026. The live price is at the top of the page.

More ferrule crimping tools

  • Aoktionyxus ratcheting ferrule crimper with sorted ferrule case

    Aoktionyxus Ratcheting self-adjusting crimper with 1250 ferrules, alloy steel

    A ratcheting, self-adjusting ferrule crimper in high-strength alloy steel with four mandrels, supplied with 1250 insulated ferrules in a sorted case.

    Crimp profile
    Four mandrels giving even pressure from all sides, third bullet
    Cross-section range
    0.25 to 10 mm² on the tool; the supplied ferrules cover 0.5 to 10 mm², second bullet
    Ratchet
    A ratchet system with an automatic clamp and stop arrangement, first bullet
    Adjustment
    Dynamically self-adjusting to the crimp diameter, first bullet
    Self-adjusting mechanisms
    Automatic clamping and stopping, first bullet
    Kit contents
    1250 insulated ferrules in the commonest sizes, sorted in a sturdy case, second bullet
    Build quality
    High-strength alloy steel, third bullet
    Amazon reference
    B0H1BWV2YT (same reference on 5 Amazon marketplaces)
    EAN
    0717363621970
    • A ratchet AND self-adjustment, which few tools at this price combine
    • The steel is named — high-strength alloy
    • The tool covers 0.25 mm² and the supplied ferrules start at 0.5 mm²

    Best for: Ferrule work where the crimp should be repeatable without thinking about it.

    ≈ €13
    Check price on Amazon
  • BAURIX self-adjusting ferrule crimper with 1800 ferrules

    BAURIX Self-adjusting square crimper with 1800 ferrules, insulated and uninsulated

    A self-adjusting ferrule crimper for both insulated and uninsulated ferrules from 0.25 to 10 mm², producing an even square crimp, with 1800 ferrules supplied.

    Crimp profile
    Even square press with pressure from four sides, third bullet
    Cross-section range
    0.25 to 10 mm², second bullet
    Ratchet
    Nowhere in the listing
    Adjustment
    Self-adjusting — the press sets itself to the ferrule, second bullet
    Self-adjusting mechanisms
    Automatic, across the range
    Kit contents
    1800 ferrules, from the title
    Build quality
    Described as giving an even square press; the steel is not named
    Amazon reference
    DE B07R6T4H7W · US B07R6T4H7W · GB B08BCNPXDJ · FR B08BCNPXDJ · IT B07R6T4H7W · ES B07R6T4H7W
    EAN
    8719327097304
    • Insulated and uninsulated ferrules both handled, stated explicitly
    • 1800 ferrules supplied
    • No ratchet stated

    Best for: Mixed work where both insulated and uninsulated ferrules turn up.

    ≈ €30
    Check price on Amazon
  • Bayertal ferrule crimper with force adjustment wheel and 2000 ferrules

    BAYERTAL Square crimper with 2000 ferrules and a force adjustment wheel

    A ferrule crimper with an adjustment wheel for setting crimping force by conductor size and ferrule type, covering 0.25 to 10 mm², with 2000 ferrules.

    Crimp profile
    Precise square press giving an even, firm connection, first bullet
    Cross-section range
    0.25 to 10 mm², given also as AWG 23 to 7, second bullet
    Ratchet
    Nowhere in the listing
    Adjustment
    An adjustment wheel for crimping force, third bullet — the only tool in this family with one
    Self-adjusting mechanisms
    Not self-adjusting; the force is set by hand on the wheel for the conductor size and ferrule type
    Kit contents
    2000 ferrules, from the title — the largest count in this family
    Build quality
    Described as giving clean and reproducible crimps; the steel is not named
    Amazon reference
    B0CQ5JKXCF (same reference on 5 Amazon marketplaces)
    EAN
    4260679360904
    • A force adjustment wheel, which lets the crimp be tuned to the ferrule type rather than assumed
    • 2000 ferrules, the largest count here
    • Manual adjustment rather than self-adjusting, so the wheel has to be set correctly

    Best for: Someone crimping several ferrule types who wants control over the result.

    ≈ €23
    Check price on Amazon

Others on the same shelf

  • HELLA fuse holder set of two in packaging

    HELLA Pair of fuse holders, original-equipment quality

    A set of two fuse holders described as original-equipment quality, intended for small retrofits and additions to vehicle wiring.

    Fuse standard
    Nowhere in the listing
    Current
    Nowhere in the listing
    Voltage ratings including DC
    Nowhere in the listing
    Terminals
    Nowhere in the listing
    Mounting
    Nowhere in the listing
    Ingress rating
    Nowhere in the listing
    Supplied fuses
    Two holders in the set, from the title; no fuse is mentioned
    Amazon reference
    B00H8WLHIC (same reference on 6 Amazon marketplaces)
    EAN
    4082300100556
    • A genuine vehicle-parts number, which a supplier catalogue can be searched against
    • Original-equipment quality, stated by a maker that supplies vehicle manufacturers
    • Every one of the seven specification lines is absent from the listing

    Best for: Someone who will look the part number up in a proper catalogue before ordering.

    ≈ £3 / €4
    Check price on Amazon
  • HeyNana inline blade fuse holders, three in a pack

    HeyNana Three inline holders, 12 AWG lead, waterproof

    Three waterproof inline blade fuse holders on 12 AWG lead, compatible with standard blade fuses.

    Fuse standard
    Compatible with all standard blade fuses, second bullet
    Current
    Nowhere in the listing — the 12 AWG lead is stated in the title and no rating is given for the holder
    Voltage ratings including DC
    Absent — 12 volt appears in the title as an application, not as a rating
    Terminals
    12 AWG lead, from the title
    Mounting
    Inline, carried by the cable
    Ingress rating
    Described as waterproof, second bullet; no IP figure is given
    Supplied fuses
    None — three holders, from the title
    Amazon reference
    B08DXGQ55P (same reference on 5 Amazon marketplaces)
    EAN
    8429440718009
    • Three holders, which covers a small fit-out in one purchase
    • 12 AWG lead named, roughly equivalent to 4 mm²
    • Two bullets in total, one of which is the quantity

    Best for: Three small accessory circuits in a van where the fuse sets the limit.

    ≈ €5
    Check price on Amazon
  • JiuXinYuKeJi Midi fuse holders with Midi fuses and clamps

    JiuXinYuKeJi Four Midi holders with six Midi fuses, PA66, 52 × 28 × 25 mm

    Four Midi fuse holders in PA66 with tinned screw terminals and an inspection window, supplied with six Midi fuses of 40 A, 50 A and 80 A.

    Fuse standard
    Midi bolt-down fuses, from the title — a different family from blade fuses
    Current
    The supplied fuses run to 80 A; the holder’s own rating is not published
    Voltage ratings including DC
    Nowhere in the listing
    Terminals
    Metal screws for a stable electrical connection, with tinned parts, first and third bullets
    Mounting
    Four holders, each approximately 52 × 28 × 25 mm, fifth bullet
    Ingress rating
    A close-fitting cover for protection against external influences, third bullet; no IP figure
    Supplied fuses
    Six: two 40 A, two 50 A, two 80 A, with eight clamps, fifth bullet
    Amazon reference
    B0FCM6WS6S (same reference on 5 Amazon marketplaces)
    EAN
    0689908299282
    • Midi fuses, which cover currents above what a blade fuse holds
    • Two of each value, so a blown fuse has a replacement in the box
    • No holder rating and no voltage rating

    Best for: A battery-to-inverter feed where forty to eighty amps has to be protected.

    ≈ €10
    Check price on Amazon

All ferrule crimping tools