Skip to content

A vehicle-maker part number, and nothing else

HELLA Pair of fuse holders, original-equipment quality

A set of two fuse holders described as original-equipment quality, intended for small retrofits and additions to vehicle wiring.

HELLA fuse holder set of two in packaging

HELLA Pair of fuse holders, original-equipment quality

A set of two fuse holders described as original-equipment quality, intended for small retrofits and additions to vehicle wiring.

Fuse standard
Nowhere in the listing
Current
Nowhere in the listing
Voltage ratings including DC
Nowhere in the listing
Terminals
Nowhere in the listing
Mounting
Nowhere in the listing
Ingress rating
Nowhere in the listing
Supplied fuses
Two holders in the set, from the title; no fuse is mentioned
Amazon reference
B00H8WLHIC (same reference on 6 Amazon marketplaces)
EAN
4082300100556
  • A genuine vehicle-parts number, which a supplier catalogue can be searched against
  • Original-equipment quality, stated by a maker that supplies vehicle manufacturers
  • Every one of the seven specification lines is absent from the listing

Best for: Someone who will look the part number up in a proper catalogue before ordering.

≈ £3 / €4
Check price on Amazon

Specifications

Fuse standard
Nowhere in the listing
Current
Nowhere in the listing
Voltage ratings including DC
Nowhere in the listing
Terminals
Nowhere in the listing
Mounting
Nowhere in the listing
Ingress rating
Nowhere in the listing
Supplied fuses
Two holders in the set, from the title; no fuse is mentioned
Amazon reference
B00H8WLHIC (same reference on 6 Amazon marketplaces)
EAN
4082300100556

A part number from a vehicle-parts maker, sold with its catalogue entry left behind.

What the bullets say

A broad range for many applications. Pragmatic protection for small retrofits. Easy handling. Original-equipment quality.

Four statements about HELLA. None about this holder.

What is therefore absent

The fuse standard. The current. The voltage. The terminals. The mounting. Any ingress rating. Seven of seven.

What a vehicle part number is worth

The part number is real and the maker supplies vehicle manufacturers. 8KV 004 418-821 resolves in a parts catalogue to a full specification, and that is a different purchase from an unbranded holder with the same silence.

One thing to check before ordering

The price. The same part number varies by a factor of four between the markets in this catalogue, which is a reason to compare before clicking.

Availability

German and Spanish Amazon stores quoted 4 € to 6 € when this page was compiled.

British Amazon store carries it too, priced in its own currency, which the euro range above deliberately omits.

French and Italian Amazon stores wanted more than 1.6× what the cheapest country wanted. A margin that wide usually means stock shipped in from elsewhere rather than a seller on the ground, so those quotes stay out of the range above.

American Amazon catalogue carries an entry for it, with nobody selling.

These figures are what Keepa reported on the day this page was last updated. Availability and pricing move without notice.

Prices quoted in this text were read on 16 September 2026. The live price is at the top of the page.

More fuse holders

  • HeyNana inline blade fuse holders, three in a pack

    HeyNana Three inline holders, 12 AWG lead, waterproof

    Three waterproof inline blade fuse holders on 12 AWG lead, compatible with standard blade fuses.

    Fuse standard
    Compatible with all standard blade fuses, second bullet
    Current
    Nowhere in the listing — the 12 AWG lead is stated in the title and no rating is given for the holder
    Voltage ratings including DC
    Absent — 12 volt appears in the title as an application, not as a rating
    Terminals
    12 AWG lead, from the title
    Mounting
    Inline, carried by the cable
    Ingress rating
    Described as waterproof, second bullet; no IP figure is given
    Supplied fuses
    None — three holders, from the title
    Amazon reference
    B08DXGQ55P (same reference on 5 Amazon marketplaces)
    EAN
    8429440718009
    • Three holders, which covers a small fit-out in one purchase
    • 12 AWG lead named, roughly equivalent to 4 mm²
    • Two bullets in total, one of which is the quantity

    Best for: Three small accessory circuits in a van where the fuse sets the limit.

    ≈ €5
    Check price on Amazon
  • JiuXinYuKeJi Midi fuse holders with Midi fuses and clamps

    JiuXinYuKeJi Four Midi holders with six Midi fuses, PA66, 52 × 28 × 25 mm

    Four Midi fuse holders in PA66 with tinned screw terminals and an inspection window, supplied with six Midi fuses of 40 A, 50 A and 80 A.

    Fuse standard
    Midi bolt-down fuses, from the title — a different family from blade fuses
    Current
    The supplied fuses run to 80 A; the holder’s own rating is not published
    Voltage ratings including DC
    Nowhere in the listing
    Terminals
    Metal screws for a stable electrical connection, with tinned parts, first and third bullets
    Mounting
    Four holders, each approximately 52 × 28 × 25 mm, fifth bullet
    Ingress rating
    A close-fitting cover for protection against external influences, third bullet; no IP figure
    Supplied fuses
    Six: two 40 A, two 50 A, two 80 A, with eight clamps, fifth bullet
    Amazon reference
    B0FCM6WS6S (same reference on 5 Amazon marketplaces)
    EAN
    0689908299282
    • Midi fuses, which cover currents above what a blade fuse holds
    • Two of each value, so a blown fuse has a replacement in the box
    • No holder rating and no voltage rating

    Best for: A battery-to-inverter feed where forty to eighty amps has to be protected.

    ≈ €10
    Check price on Amazon
  • Offgridtec inline blade fuse holder with a black rubber body

    Offgridtec Inline blade fuse holder, 30 A, 25 cm of 4 mm² lead

    A sealed inline blade fuse holder rated to 30 A, supplied pre-wired with 25 cm of 4 mm² cable in a rubber body with a waterproof lid.

    Fuse standard
    Standard ATC and blade fuses, third bullet
    Current
    Rated to 30 A, fifth bullet
    Voltage ratings including DC
    Nowhere in the listing — 12 V and 24 V systems are named as applications, which is not a rating
    Terminals
    Pre-wired with 25 cm of 4 mm² cable at both ends, fourth bullet — no crimping needed
    Mounting
    Inline, carried by the cable; no fixing described
    Ingress rating
    A fully sealed rubber body with a waterproof lid against water, dust and dirt, second bullet; no IP figure is given
    Supplied fuses
    None — the holder is supplied alone, one piece
    Amazon reference
    B077SGP5B3 (same reference on 5 Amazon marketplaces)
    EAN
    4250983245851
    • Pre-wired in 4 mm², which suits the 30 A rating rather than undercutting it
    • A sealed rubber body rather than a plastic clip-together cover
    • No voltage rating, on a component sold into 12 V and 24 V systems

    Best for: A single circuit tapped off a battery where the run is already cabled.

    ≈ €4
    Check price on Amazon

Others on the same shelf

  • Ouitble carbon brushes for generators, five pieces

    Ouitble Five carbon brushes for 2–3 kW 168F generators, 5 × 3 × 1 cm

    A set of five carbon brushes for 2 to 3 kW petrol generators with 168F engines, each measuring 5 × 3 × 1 cm, in fine carbon.

    Model compatibility
    Universal brushes for petrol generators of 2 kW to 3 kW with 168F engines, second bullet; no model list is published
    Parallel kit ratings
    Not applicable — these are carbon brushes
    Cover material
    Not applicable
    Venting
    Not applicable
    Wheel kit load
    Not applicable
    Oil specification
    Not applicable
    Service parts
    Five carbon brushes in fine carbon, each measuring 5.00 × 3.00 × 1.00 cm, first, fourth and fifth bullets
    Amazon reference
    B09MM28R3K (same reference on 5 Amazon marketplaces)
    EAN
    9327587040627
    • The dimensions are published to two decimals, which is how a brush is matched
    • Five in a pack, so a set change leaves spares
    • No model list beyond the power band and engine family

    Best for: A 168F generator that has started producing voltage intermittently.

    ≈ €11
    Check price on Amazon
  • Wiltec generator fuel tap with a filter bowl

    Wiltec Fuel tap with filter, 6 mm hose, M10 × 1.25 male thread

    A fuel tap with an integrated filter for petrol generators, with a 6 mm fuel hose connection and an M10 × 1.25 male thread.

    Model compatibility
    Designed for petrol generators and stated to fit a wide range of models thanks to the M10 × 1.25 thread, third bullet; no model list is published
    Parallel kit ratings
    Not applicable — this is a fuel tap
    Cover material
    Not applicable
    Venting
    Not applicable
    Wheel kit load
    Not applicable
    Oil specification
    Not applicable
    Service parts
    A fuel tap with an integrated filter that keeps contamination out of the engine and can be replaced quickly, second and fifth bullets; 6 mm fuel hose connection, M10 × 1.25 male thread
    Amazon reference
    B00P1GAFZ8 (same reference on 5 Amazon marketplaces)
    EAN
    4250390825776
    • The thread and the hose bore are both published, which is the whole compatibility question
    • The filter is described as easily accessible and quickly replaceable
    • No list of generators it is known to fit

    Best for: A generator whose fuel tap has started weeping, measured first.

    ≈ €9
    Check price on Amazon
  • SEPO-LEITUNGEN ten-pair MC4 solar connector set

    SEPO-LEITUNGEN Ten pairs with two tools, IP67, for 4 and 6 mm²

    Ten pairs of solar connectors supplied with two assembly tools, rated IP67 and described as UV-resistant, for 4 and 6 mm² cable.

    Rated current
    Nowhere in the listing
    Voltage
    Nowhere in the listing
    Accepted cross-sections
    4 mm² and 6 mm², third bullet
    Ingress rating
    IP67, described as resistant to rain, dust and UV, second bullet
    Contact plating
    Nowhere in the listing
    Certifications
    Absent — described as compatible with common PV systems and as a replacement for common solar connectors
    Required tools
    Two assembly tools included; a crimping tool is not
    Amazon reference
    B0F3XHPFJD (same reference on 5 Amazon marketplaces)
    EAN
    4262413910543
    • Ten pairs, enough for a whole small array including spares
    • UV resistance named alongside the ingress rating, which matters on a roof
    • No current rating, no voltage rating and no contact material

    Best for: A full array where ten pairs and spares are needed in one purchase.

    ≈ €11
    Check price on Amazon

All fuse holders