Skip to content

The only one to publish a voltage

GTIWUNG Ten inline holders, 16 AWG, fully potted, 32 V max

Ten fully potted inline blade fuse holders on 16 AWG wire, for 1 A to 20 A blade fuses at a maximum of 32 V.

GTIWUNG inline blade fuse holders, ten in a pack

GTIWUNG Ten inline holders, 16 AWG, fully potted, 32 V max

Ten fully potted inline blade fuse holders on 16 AWG wire, for 1 A to 20 A blade fuses at a maximum of 32 V.

Fuse standard
Standard blade fuses in 1 A, 2 A, 3 A, 5 A, 7.5 A, 10 A, 15 A and 20 A, second bullet
Current
Compatible to 20 A, second bullet
Voltage ratings including DC
Maximum 32 V, second bullet — THE ONLY VOLTAGE RATING PUBLISHED BY ANY HOLDER IN THIS FAMILY
Terminals
16 AWG wire, first bullet
Mounting
Inline, carried by the cable
Ingress rating
A fully potted body with protective covers against dust, water and damp, first and third bullets; no IP figure
Supplied fuses
None — ten holders, from the title
Amazon reference
B07KPKND2Q (same reference on 6 Amazon marketplaces)
EAN
0676422642922
  • A maximum voltage is published: 32 V. No other holder in this family gives one
  • The compatible fuse values are listed individually, 1 A to 20 A
  • 16 AWG is thin for the upper end of the stated range

Best for: Ten small accessory circuits, each under twenty amps.

≈ £10 / €12
Check price on Amazon

Specifications

Fuse standard
Standard blade fuses in 1 A, 2 A, 3 A, 5 A, 7.5 A, 10 A, 15 A and 20 A, second bullet
Current
Compatible to 20 A, second bullet
Voltage ratings including DC
Maximum 32 V, second bullet — THE ONLY VOLTAGE RATING PUBLISHED BY ANY HOLDER IN THIS FAMILY
Terminals
16 AWG wire, first bullet
Mounting
Inline, carried by the cable
Ingress rating
A fully potted body with protective covers against dust, water and damp, first and third bullets; no IP figure
Supplied fuses
None — ten holders, from the title
Amazon reference
B07KPKND2Q (same reference on 6 Amazon marketplaces)
EAN
0676422642922

Ten holders, and the one voltage rating in this family.

Thirty-two volts

Published in the second bullet. Six other holders in this family name 12 V and 24 V applications and give no rating at all; this one gives the number.

It is the conventional automotive blade-fuse rating, and it draws the line: a 12 V or 24 V system sits comfortably inside it, a 48 V bank does not.

The fuse values

Listed one by one — 1 A, 2 A, 3 A, 5 A, 7.5 A, 10 A, 15 A, 20 A. A range stated rather than implied.

The construction

Fully potted, with protective covers against dust, water and damp. Potting is better than a clip-together body in a place that gets wet, and no IP figure is published for either.

The reservation

16 AWG wire, roughly 1.3 mm². For a 20 A fuse that is a modest conductor, and the listing pairs the two without comment.

A note on the listing

A French word is left in the German text of the last bullet, which is the signature of a machine translation.

Availability

German, French, Italian and Spanish Amazon stores quoted 12 € to 14 € when this page was compiled.

British Amazon store carries it too, priced in its own currency, which the euro range above deliberately omits.

American Amazon catalogue carries an entry for it, with nobody selling.

These figures are what Keepa reported on the day this page was last updated. Availability and pricing move without notice.

Prices quoted in this text were read on 16 September 2026. The live price is at the top of the page.

More fuse holders

  • HELLA fuse holder set of two in packaging

    HELLA Pair of fuse holders, original-equipment quality

    A set of two fuse holders described as original-equipment quality, intended for small retrofits and additions to vehicle wiring.

    Fuse standard
    Nowhere in the listing
    Current
    Nowhere in the listing
    Voltage ratings including DC
    Nowhere in the listing
    Terminals
    Nowhere in the listing
    Mounting
    Nowhere in the listing
    Ingress rating
    Nowhere in the listing
    Supplied fuses
    Two holders in the set, from the title; no fuse is mentioned
    Amazon reference
    B00H8WLHIC (same reference on 6 Amazon marketplaces)
    EAN
    4082300100556
    • A genuine vehicle-parts number, which a supplier catalogue can be searched against
    • Original-equipment quality, stated by a maker that supplies vehicle manufacturers
    • Every one of the seven specification lines is absent from the listing

    Best for: Someone who will look the part number up in a proper catalogue before ordering.

    ≈ £3 / €4
    Check price on Amazon
  • HeyNana inline blade fuse holders, three in a pack

    HeyNana Three inline holders, 12 AWG lead, waterproof

    Three waterproof inline blade fuse holders on 12 AWG lead, compatible with standard blade fuses.

    Fuse standard
    Compatible with all standard blade fuses, second bullet
    Current
    Nowhere in the listing — the 12 AWG lead is stated in the title and no rating is given for the holder
    Voltage ratings including DC
    Absent — 12 volt appears in the title as an application, not as a rating
    Terminals
    12 AWG lead, from the title
    Mounting
    Inline, carried by the cable
    Ingress rating
    Described as waterproof, second bullet; no IP figure is given
    Supplied fuses
    None — three holders, from the title
    Amazon reference
    B08DXGQ55P (same reference on 5 Amazon marketplaces)
    EAN
    8429440718009
    • Three holders, which covers a small fit-out in one purchase
    • 12 AWG lead named, roughly equivalent to 4 mm²
    • Two bullets in total, one of which is the quantity

    Best for: Three small accessory circuits in a van where the fuse sets the limit.

    ≈ €5
    Check price on Amazon
  • JiuXinYuKeJi Midi fuse holders with Midi fuses and clamps

    JiuXinYuKeJi Four Midi holders with six Midi fuses, PA66, 52 × 28 × 25 mm

    Four Midi fuse holders in PA66 with tinned screw terminals and an inspection window, supplied with six Midi fuses of 40 A, 50 A and 80 A.

    Fuse standard
    Midi bolt-down fuses, from the title — a different family from blade fuses
    Current
    The supplied fuses run to 80 A; the holder’s own rating is not published
    Voltage ratings including DC
    Nowhere in the listing
    Terminals
    Metal screws for a stable electrical connection, with tinned parts, first and third bullets
    Mounting
    Four holders, each approximately 52 × 28 × 25 mm, fifth bullet
    Ingress rating
    A close-fitting cover for protection against external influences, third bullet; no IP figure
    Supplied fuses
    Six: two 40 A, two 50 A, two 80 A, with eight clamps, fifth bullet
    Amazon reference
    B0FCM6WS6S (same reference on 5 Amazon marketplaces)
    EAN
    0689908299282
    • Midi fuses, which cover currents above what a blade fuse holds
    • Two of each value, so a blown fuse has a replacement in the box
    • No holder rating and no voltage rating

    Best for: A battery-to-inverter feed where forty to eighty amps has to be protected.

    ≈ €10
    Check price on Amazon

Others on the same shelf

  • HOLZER carbon brushes for generators with an 8 mm base

    HOLZER Carbon brushes for 6 kW class generators, 8 mm base

    Carbon brushes for generators in the 6 kW class with an 8 mm base.

    Model compatibility
    6 kW class generators, second bullet; no model list is published
    Parallel kit ratings
    Not applicable — these are carbon brushes
    Cover material
    Not applicable
    Venting
    Not applicable
    Wheel kit load
    Not applicable
    Oil specification
    Not applicable
    Service parts
    Carbon brushes with an 8 mm base, second bullet. The first bullet of the listing reads, in full: brand unknown
    Amazon reference
    B01MAZBZN8 (same reference on 5 Amazon marketplaces)
    EAN
    4260109642310
    • The base dimension is published — 8 mm — which is the matching figure
    • A larger power class than the other brush set here, 6 kW rather than 2 to 3 kW
    • The listing consists of two lines, the first of which states that the brand is unknown

    Best for: A 6 kW generator whose brush dimensions are already known.

    ≈ £15 / €12
    Check price on Amazon
  • Ouitble carbon brushes for generators, five pieces

    Ouitble Five carbon brushes for 2–3 kW 168F generators, 5 × 3 × 1 cm

    A set of five carbon brushes for 2 to 3 kW petrol generators with 168F engines, each measuring 5 × 3 × 1 cm, in fine carbon.

    Model compatibility
    Universal brushes for petrol generators of 2 kW to 3 kW with 168F engines, second bullet; no model list is published
    Parallel kit ratings
    Not applicable — these are carbon brushes
    Cover material
    Not applicable
    Venting
    Not applicable
    Wheel kit load
    Not applicable
    Oil specification
    Not applicable
    Service parts
    Five carbon brushes in fine carbon, each measuring 5.00 × 3.00 × 1.00 cm, first, fourth and fifth bullets
    Amazon reference
    B09MM28R3K (same reference on 5 Amazon marketplaces)
    EAN
    9327587040627
    • The dimensions are published to two decimals, which is how a brush is matched
    • Five in a pack, so a set change leaves spares
    • No model list beyond the power band and engine family

    Best for: A 168F generator that has started producing voltage intermittently.

    ≈ €11
    Check price on Amazon
  • Wiltec generator fuel tap with a filter bowl

    Wiltec Fuel tap with filter, 6 mm hose, M10 × 1.25 male thread

    A fuel tap with an integrated filter for petrol generators, with a 6 mm fuel hose connection and an M10 × 1.25 male thread.

    Model compatibility
    Designed for petrol generators and stated to fit a wide range of models thanks to the M10 × 1.25 thread, third bullet; no model list is published
    Parallel kit ratings
    Not applicable — this is a fuel tap
    Cover material
    Not applicable
    Venting
    Not applicable
    Wheel kit load
    Not applicable
    Oil specification
    Not applicable
    Service parts
    A fuel tap with an integrated filter that keeps contamination out of the engine and can be replaced quickly, second and fifth bullets; 6 mm fuel hose connection, M10 × 1.25 male thread
    Amazon reference
    B00P1GAFZ8 (same reference on 5 Amazon marketplaces)
    EAN
    4250390825776
    • The thread and the hose bore are both published, which is the whole compatibility question
    • The filter is described as easily accessible and quickly replaceable
    • No list of generators it is known to fit

    Best for: A generator whose fuel tap has started weeping, measured first.

    ≈ €9
    Check price on Amazon

All fuse holders