Skip to content

The full contents, item by item

GLIESE Four rails of 1140 mm, 0°–90°, for panels to 115 cm, 100–600 W

A four-piece aluminium mounting set with 1140 mm rails adjustable from 0 to 90 degrees, for panels to about 115 cm and roughly 100 to 600 watts.

GLIESE aluminium solar panel mounting rails with adjustable angle

GLIESE Four rails of 1140 mm, 0°–90°, for panels to 115 cm, 100–600 W

A four-piece aluminium mounting set with 1140 mm rails adjustable from 0 to 90 degrees, for panels to about 115 cm and roughly 100 to 600 watts.

Supported panel sizes
Panels to about 115 cm and roughly 100 to 600 watts, mountable horizontally or vertically, third bullet
Weight
Nowhere in the listing
Tilt adjustment
0° to 90°, from the title — the full range, shared only with the V-CANT-C mount here
Material
High-strength aluminium rails in a set of four, first bullet
Corrosion resistance
Described as torsion-resistant and corrosion-resistant, second bullet; no alloy or coating is named
Fixing method
Flat roof, garage roof, balcony, balcony railing, wall, façade, boats, camping and motorhomes, fourth bullet
Any stated wind load
NOWHERE IN THE LISTING — no wind speed, wind zone or standard appears anywhere in the listing
Amazon reference
DE B0C2Q278N2 · US B0C2Q278N2 · FR B0C2Q4MG28 · IT B0C2Q4MG28 · ES B0C2Q4MG28
EAN
0793127980880
  • The contents are listed piece by piece with dimensions: eight 1140 mm rails, four 545 mm U-rails, M8 × 20 bolts
  • 0° to 90°, so the panel can be laid flat or stood vertical
  • No wind load

Best for: A flat roof or a wall where the panel is under 115 cm on its mounting edge.

≈ €42
Check price on Amazon

Specifications

Supported panel sizes
Panels to about 115 cm and roughly 100 to 600 watts, mountable horizontally or vertically, third bullet
Weight
Nowhere in the listing
Tilt adjustment
0° to 90°, from the title — the full range, shared only with the V-CANT-C mount here
Material
High-strength aluminium rails in a set of four, first bullet
Corrosion resistance
Described as torsion-resistant and corrosion-resistant, second bullet; no alloy or coating is named
Fixing method
Flat roof, garage roof, balcony, balcony railing, wall, façade, boats, camping and motorhomes, fourth bullet
Any stated wind load
NOWHERE IN THE LISTING — no wind speed, wind zone or standard appears anywhere in the listing
Amazon reference
DE B0C2Q278N2 · US B0C2Q278N2 · FR B0C2Q4MG28 · IT B0C2Q4MG28 · ES B0C2Q4MG28
EAN
0793127980880

A set listed piece by piece.

The contents

Eight aluminium mounting rails at 1140 mm. Four U-shaped rails at 545 mm for the angle adjustment. M8 × 20 bolts.

Each item with its dimension. That is the useful form: you know what arrives and you know what it is made of before it does.

The range of movement

0° to 90°. Flat to vertical. Two mounts in this family offer the whole range and the rest cover a band in the middle.

Vertical is not a curiosity — on a wall or a façade it is the only option, and at a northern latitude in winter the sun is low enough that it is also the best one.

The fit

Panels to about 115 cm on the mounting edge, roughly 100 to 600 watts, horizontal or vertical. Two ways to check, which is better than one.

The lines this listing leaves blank

Any wind load. Any weight. And the alloy — described as high-strength aluminium where the Generisch and SOLAFIX mounts in this family name AL6005-T5 outright.

Availability

German Amazon store quoted about 42 € when this page was compiled.

American, French, Italian and Spanish Amazon catalogues carry an entry for it, with nobody selling.

British Amazon store returned nothing at all, so the buy button there runs a search instead of landing on an empty page.

These figures are what Keepa reported on the day this page was last updated. Availability and pricing move without notice.

Prices quoted in this text were read on 16 September 2026. The live price is at the top of the page.

More solar panel mounts

  • NuaSol tiled roof solar mounting kit with roof hooks and rails

    NuaSol Tiled roof, 2 modules, roof hooks under the tiles, 1230 mm profiles

    A tiled roof mounting kit for two solar modules, fixing aluminium profiles under the tiles with roof hooks, with end and middle clamps and an expansion set.

    Supported panel sizes
    Two solar modules; no panel dimensions are published, first bullet
    Weight
    Nowhere in the listing
    Tilt adjustment
    None — a tiled roof mount follows the pitch of the roof
    Material
    Aluminium profile, second bullet
    Corrosion resistance
    Nowhere in the listing — no alloy, coating or stainless grade is named for the hooks
    Fixing method
    Roof hooks fitted directly under the tiles with supplied wood screws; modules held by end and middle clamps, second and third bullets
    Any stated wind load
    NOWHERE IN THE LISTING — no wind speed, wind zone or standard appears in the listing
    Amazon reference
    B0CBLYVL3L (same reference on 5 Amazon marketplaces)
    EAN
    4252023116251
    • Every component published with its dimensions — profile, connector, end clamp, end cap
    • An expansion set is offered, so a third module does not mean a second kit
    • No corrosion specification for the roof hooks, which is what rusts first

    Best for: A tiled roof where the profiles have to be planned before the tiles come off.

    ≈ €80
    Check price on Amazon
  • SOLAFIX tiled roof mounting kit with stainless roof hooks and rails

    SOLAFIX Tiled roof, 2 modules 30–40 mm frame, EASY-CLICK clamps, 1.4301 hooks

    A tiled roof kit for two modules with 30 to 40 mm frames, using 1.4301 stainless roof hooks and AL6005-T5 aluminium profiles with pre-assembled clamps.

    Supported panel sizes
    Common solar modules with a frame height of 30 to 40 mm, third bullet
    Weight
    Nowhere in the listing
    Tilt adjustment
    None — a tiled roof mount follows the pitch of the roof
    Material
    Aluminium profiles in AL6005-T5, second bullet
    Corrosion resistance
    Corrosion-resistant roof hooks in 1.4301 stainless steel, second bullet — the grade is named
    Fixing method
    Six roof hooks with three wood screws each; pre-assembled components and EASY-CLICK clamps, first and fifth bullets
    Any stated wind load
    NOWHERE IN THE LISTING — tested and certified is claimed in the second bullet without naming a test or a body
    Amazon reference
    B0DH57LL1L (same reference on 5 Amazon marketplaces)
    EAN
    4270000212475
    • Both grades published: AL6005-T5 for the profiles and 1.4301 for the hooks
    • The frame height it fits is stated — 30 to 40 mm — which is the actual compatibility question
    • Tested and certified is claimed without naming the test or the certifying body

    Best for: A tiled roof where the module frame height has already been measured.

    ≈ €80
    Check price on Amazon
  • SolarFuture ballasted flat roof solar mount in anodised aluminium

    SolarFuture Flat roof, no drilling, ballasted, anodised aluminium, to 135 kg

    A ballasted flat roof mount for two solar panels in anodised aluminium, carrying up to 135 kg of ballast without drilling the roof membrane.

    Supported panel sizes
    Panels to 114 cm high, regardless of length; a complete set for two panels, fourth bullet
    Weight
    The ballast element carries up to 135 kg, second bullet — THE ONLY LOAD FIGURE PUBLISHED BY ANY MOUNT In this catalogue
    Tilt adjustment
    Tilt and width both adjustable to suit the module, third bullet
    Material
    Massive anodised aluminium, second bullet
    Corrosion resistance
    Anodised, stated in the second bullet
    Fixing method
    Ballasted — a weighting element spreads the load of paving bricks over a wide area, so the roof membrane is never drilled, first bullet
    Any stated wind load
    NOWHERE IN THE LISTING — storm security is claimed in the first bullet without a wind speed or a standard
    Amazon reference
    B0H1NWLC58 (same reference on 5 Amazon marketplaces)
    EAN
    4270004153194
    • A published load figure — 135 kg of ballast — which nothing else in this catalogue gives
    • No drilling, so a flat roof membrane stays intact
    • No wind load, which is precisely what ballast is calculated against

    Best for: A flat roof that must not be penetrated, where bricks can be carried up.

    ≈ €70
    Check price on Amazon

Others on the same shelf

  • RGBer Type 2 charging cable with attached protective caps

    RGBer 11 kW, 16 A, three-phase, IEC 62196-2, 5/10/15 m

    A three-phase Type 2 charging cable rated 11 kW at 16 A to IEC 62196-2, with permanently attached protective caps, in 5, 10 or 15 metres.

    Current rating
    16 A, first bullet
    Coding
    IEC 62196-2, second bullet — the Type 2 connector standard
    Phases
    Three phase, giving up to 11 kW, first bullet
    Length
    5 m, 10 m or 15 m, fifth bullet — the only cable here offered at 15 m
    Cross-section
    Nowhere in the listing
    Flexibility
    Nowhere in the listing
    Weight
    Nowhere in the listing
    Storage
    Protective caps permanently attached to the plug and coupling, third bullet; no bag is mentioned
    Amazon reference
    B0H58FHDSK (same reference on 4 Amazon marketplaces)
    EAN
    4260710960865
    • The caps are attached rather than loose, so they are still there in six months
    • Fifteen metres is available, which no other cable here offers
    • No cross-section, no weight and no flexibility statement

    Best for: A public charging post that is further from the parking space than it looks.

    ≈ €70
    Check price on Amazon
  • tomons Type 2 charging cable with a storage bag

    tomons 22 kW, 32 A, three-phase, 5 m, IP55, −30 °C to +50 °C, TÜV mark

    A three-phase Type 2 charging cable rated 22 kW at 32 A to IEC 62196-2, IP55 from −30 °C to +50 °C, supplied with a storage bag and cleaning cloth.

    Current rating
    32 A, from the title — the highest current rating in this family
    Coding
    IEC 62196-2, second bullet
    Phases
    Three phase, up to 22 kW, from the title and first bullet
    Length
    5 metres, from the title
    Cross-section
    Nowhere in the listing
    Flexibility
    Nowhere in the listing
    Weight
    Nowhere in the listing
    Storage
    A storage bag, a cleaning cloth and a user manual are supplied, fifth bullet; IP55 with an operating range of −30 °C to +50 °C, third bullet; certified with TÜV mark, CB, CE, RoHS, UKCA and Reach, fourth bullet
    Amazon reference
    B0D2XT6K4K (same reference on 6 Amazon marketplaces)
    EAN
    6976521110587
    • 32 A three-phase, which halves the charging time against the 16 A cables here
    • An operating range published at both ends, −30 °C to +50 °C, with IP55
    • No cross-section, on the cable in this family that carries the most current

    Best for: A three-phase wallbox or public post that can actually deliver 22 kW.

    ≈ €81
    Check price on Amazon
  • VoltBox portable Type 2 charger with a Schuko plug and control box

    VoltBox Schuko to Type 2, 3.7 kW, 7 m, 6/8/10/13/16 A, TPU, IP65

    A seven-metre Schuko to Type 2 portable charger with five current settings to 16 A, in TPU rated IP65 from −30 °C to 50 °C, with a delayed charging timer.

    Current rating
    Five settings — 6 A, 8 A, 10 A, 13 A, 16 A — for a maximum of 3.7 kW at 230 V, first bullet
    Coding
    IEC 62196-2, fifth bullet
    Phases
    Single phase, from the title
    Length
    7 metres, third bullet
    Cross-section
    Nowhere in the listing
    Flexibility
    TPU sheath, fourth bullet; no flexibility figure is given
    Weight
    Nowhere in the listing
    Storage
    Nowhere in the listing. IP65, weather-resistant from −30 °C to 50 °C, fourth bullet; delayed charging can be set from 1 to 12 hours, second bullet. NOTE: this product carries the manufacturer reference VPC-B5-16AC, the same reference as the WityCharge cable in this family, under a different EAN and ASIN
    Amazon reference
    B0FP4NFC9V (same reference on 5 Amazon marketplaces)
    EAN
    6979047250034
    • Five discrete current settings rather than a range, so the value is unambiguous
    • A 1 to 12 hour delay timer for off-peak charging, with no app required
    • The same manufacturer reference appears under a second brand in this family

    Best for: Off-peak charging from a household socket without installing anything.

    ≈ €108
    Check price on Amazon

All solar panel mounts