Skip to content

Brand

GTIWUNG

Connectors and fuse holders, in quantity

Small parts sold ten at a time, which is how small parts are actually used.

The voltage nobody else publishes

The inline fuse holders state a maximum of 32 V.

Six other holders in that family name 12 V and 24 V applications and give no rating at all. Thirty-two volts is the conventional automotive blade-fuse rating, and it draws the line: a 12 V or 24 V system sits comfortably inside it, a 48 V bank does not.

One listing in the family gives the number.

The fuse values, listed

1 A, 2 A, 3 A, 5 A, 7.5 A, 10 A, 15 A, 20 A — named one by one rather than implied by a range.

The connectors

Anderson-style 50 A, 600 V housings. Genderless, so two identical connectors mate — which is why they turn up wherever a battery has to be connected and disconnected repeatedly.

The reservation on the holders

16 AWG wire, roughly 1.3 mm², paired with a 20 A fuse compatibility. That is a modest conductor for that current, and the listing sets the two side by side without comment.

Everything GTIWUNG puts on these shelves, one page each

  • GTIWUNG 50 A battery quick connectors

    GTIWUNG 50 A 600 V connectors for 6 to 8 AWG, 12 to 36 V

    Quick-connect battery connectors rated 50 A and 600 V for 6 to 8 AWG cable and 12 to 36 V systems, with contacts that may be soldered or crimped.

    Current rating
    50 A, first bullet, for 12 to 36 V systems
    Housing size
    Nowhere in the listing
    Colour coding
    Nowhere in the listing
    Contact material
    Nowhere in the listing
    Crimp range
    6 to 8 AWG, first bullet — published in AWG only, with no mm² equivalent
    Mating cycles
    Nowhere in the listing
    Available accessories
    None listed
    Amazon reference
    B089SV3N66 (same reference on 6 Amazon marketplaces)
    EAN
    0742089639442
    • A system voltage range is published — 12 to 36 V — which the others here omit
    • The intended uses are named: winches, trailers and other electrical equipment
    • The cable range is given in AWG only on a German listing

    Best for: A winch lead on a vehicle where the connector is made up once and left.

    ≈ £9 / €10
    Check price on Amazon
  • GTIWUNG inline blade fuse holders, ten in a pack

    GTIWUNG Ten inline holders, 16 AWG, fully potted, 32 V max

    Ten fully potted inline blade fuse holders on 16 AWG wire, for 1 A to 20 A blade fuses at a maximum of 32 V.

    Fuse standard
    Standard blade fuses in 1 A, 2 A, 3 A, 5 A, 7.5 A, 10 A, 15 A and 20 A, second bullet
    Current
    Compatible to 20 A, second bullet
    Voltage ratings including DC
    Maximum 32 V, second bullet — THE ONLY VOLTAGE RATING PUBLISHED BY ANY HOLDER IN THIS FAMILY
    Terminals
    16 AWG wire, first bullet
    Mounting
    Inline, carried by the cable
    Ingress rating
    A fully potted body with protective covers against dust, water and damp, first and third bullets; no IP figure
    Supplied fuses
    None — ten holders, from the title
    Amazon reference
    B07KPKND2Q (same reference on 6 Amazon marketplaces)
    EAN
    0676422642922
    • A maximum voltage is published: 32 V. No other holder in this family gives one
    • The compatible fuse values are listed individually, 1 A to 20 A
    • 16 AWG is thin for the upper end of the stated range

    Best for: Ten small accessory circuits, each under twenty amps.

    ≈ £10 / €12
    Check price on Amazon

A price quoted in the text of a PowerVerdict page dates from the day that page was written; the live figure beside each product is fetched while you read and replaces it.